A comparative study on mechanical and rheological properties of ternary rubber blends
- 8 January 2020
- journal article
- research article
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 29 (1) , 15-28
Abstract
Polymer blends lead to producing a new class of plastics, which may have better properties than being individual. In this study, the ternary blends of natural rubber (NR)/styrene-butadiene rubber (SBR)/nitrile rubber (NBR) were prepared via melt compounding, and then the physicomechanical properties of ternary NR/SBR/NBR blends were investigated. NR content was kept constant at 30 phr, while SBR and NBR fractions were varied simultaneously. The effect of the addition of 3 phr of ultrablend 4000 as compatibilizer on the compatibility of the rubber blends was studied. The results revealed that the use of the compatibilizer has significantly resulted in the clear stability of the scorch time and the optimum cure time of the blends. Tensile strength; stress at 100%, 200%, and 300% elongations; elongation at break %; compression strength; and compression set increase with the NBR content. There was a dramatic rise in the value of swelling ratio with the decrease of NBR. Moreover, the dynamic mechanical analysis showed some shifts in glass transition temperatures for blends to higher and lower temperatures as a function of the composition, which indicates the partial miscibility between the contributing components. Scanning electron microscopy of the tear fracture surfaces indicated that incorporation of NBR in the blends resulted in better adhesion of ternary blends and improved the tensile properties of ternary blends.Keywords
This publication has 31 references indexed in Scilit:
- Largely improved impact toughness of PA6/EPDM-g-MA/HDPE ternary blends: The role of core–shell particles formed in melt processing on preventing micro-crack propagationPolymer, 2013
- Characterization of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends: The effects of epoxidized natural rubber (ENR-50) as a compatibilizerPolymer Testing, 2010
- Thermoplastic elastomers based on compatibilized poly(butylene terephthalate) blends: Effect of functional groups and dynamic curingJournal of Applied Polymer Science, 2008
- Improvement of the homogeneity of SBR/NBR blends using polyglycidylmethacrylate‐g‐butadiene rubberJournal of Applied Polymer Science, 2005
- Compatibilization of SBR/NBR Blends Using Poly Acrylonitrile as CompatibilizerPolymer-Plastics Technology and Engineering, 2005
- Natural rubber/ethylene propylene diene blends for high insulation iron crossarmsJournal of Applied Polymer Science, 2004
- Temperature dependence of the degree of compatibility in SBR–NBR blends by ultrasonic attenuation measurements: influence of unsaturated polyester additivePolymer, 2001
- Crystallization and Strength of Natural Rubber and Synthetic cis-1,4-PolyisopreneRubber Chemistry and Technology, 1998
- Miscible blends from rigid poly(vinyl chloride) and epoxidized natural rubberJournal of Materials Science, 1988
- Incompatibility and Phase Formation in Solid Polymer Mixures and Graft and Block CopolymersRubber Chemistry and Technology, 1968