Effects of Drying Parameters on Heat Transfer during Drying of Fermented Ground Cassava in a Rotary Dryer
Authors:
- 31 March 2010
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 28 (4) , 550-561
Abstract
The effects of drying parameters on heat transfer during drying of fermented ground cassava in a rotary dryer were studied. The fermented ground cassava was dried in a bench-scale rotary dryer at different inlet air temperatures, inlet air velocities, relative humidities, feed rates, drum drive speeds, and feed drive speeds. It is shown that inlet air temperature, inlet air velocity, and feed rate have significant effects on the specific heat transfer coefficient and heat load in the material. Models that predict the specific heat transfer coefficient as a function of inlet air temperature and inlet air velocity and the heat load as a function of inlet air temperature, inlet air velocity, and feed rate are also presented. Predictions of the models are compared with experimental data and good agreement is obtained.Keywords
This publication has 28 references indexed in Scilit:
- Mathematical Modeling of Rotary Drying of Woody BiomassDrying Technology, 2008
- Temperature Characteristics of Pharmaceutical Powders During Microwave DryingDrying Technology, 2006
- EXPERIMENTAL STUDY ON DRYING OF CHILLI IN A COMBINED MICROWAVE-VACUUM-ROTARY DRUM DRYERDrying Technology, 2002
- MODELLING AND CONTROL OF AN ALFALFA ROTARY DRYERDrying Technology, 2002
- AN RTD STUDY FOR THE FLOW OF LIGNITE PARTICLES THROUGH A PILOT ROTARY DRYER PART I; BARE DRUM CASEDrying Technology, 1999
- Modelling and Simulation of a Direct Contact Rotary DryerDrying Technology, 1996
- Drying of Grains and ForagesDrying Technology, 1996
- CLASSIFICATION OF DRYING MODELS FOR POROUS SOLIDSDrying Technology, 1993
- Physical properties of cassava mashInternational Journal of Food Science and Technology, 1989
- Determination of the optimum parameters of the rotary dryer for gari processingThe Chemical Engineering Journal, 1983