Design technique for nonlinear phase SAW filters using slanted finger interdigital transducers
Author:
- 1 January 1998
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 45 (1) , 41-47
Abstract
This paper describes a useful design technique to achieve a nonlinear phase SAW filter using slanted finger interdigital transducers (SFITs) or tapered interdigital transducers which are suitable for wide-band filters in intermediate frequency stages. A required nonlinear phase response in the passband can be obtained by changing center-to-center distances between input and output SFITs along an axis perpendicular to the SAW propagation axis. The design is based on a building-block approach in the frequency domain. A nonlinear phase SAW filter with a center frequency of 70 MHz and a fractional bandwidth of about 10% is demonstrated on x-cut 112.2/spl deg/ y-propagating LiTaO/sub 3/. Because the substrate has a power flow angle of 1.55 degrees, the SFIT pattern is tilted along that angle. Good agreement between theoretical and experimental results is obtained.Keywords
This publication has 13 references indexed in Scilit:
- Design techniques for SAW filters using slanted finger interdigital transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- Withdrawal weighted fan-shaped SAW transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1995
- A Study of the Effects of Apodized Structure Geometries on SAW Filter Parameters1987
- A New Low-Loss, Single-Bounce, Reflective Array Filter Using Hyperbolically Tapered Transducers1986
- Improved Modeling of Wide-Band Linear Phase SAW Filters Using Transducers with Curved FingersIEEE Transactions on Sonics and Ultrasonics, 1984
- Wide-Band Linear Phase SAW Filter Design Using Slanted Transducer FingersIEEE Transactions on Sonics and Ultrasonics, 1982
- Phase Compensation of Linear FM Slanted Transducers by Use of Metallized Stripes1982
- SAW Filters as Applied to Group-Delay Equalizer in Television Rebroadcast Transmitters1979
- Saw IF Filter on LITaO3 for Color TV ReceiversIEEE Transactions on Consumer Electronics, 1978
- A Simple "Building Block" Method for the Design of SAW Filters Having Non-Linear Phase Response1976