Effects of Substrate Bias Voltages on the Erosion Wear Resistance of TiN Coatings Deposited by Pulsed Filtered Vacuum Cathode Arc Deposition
Authors:
- 2 June 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 443, 481-486
Abstract
TiN coatings were produced on substrates of a hard metal at different bias by pulsed filtered vacuum cathode arc deposition assisted with ion bombardment. The erosion wear resistance of TiN coatings was investigated. The erosion wear was tested with a gas blast apparatus. In the test, TiN coatings were impacted at an impingement angle of 90° by angular SiC solid particles with an average diameter of 124um. The maximum depth of the erosion scar measured by the Veeco NT9300 optical profiler was used to evaluate the erosion wear loss of the coatings. The coatings proved to have lower erosion rate than the substrate material and consequently, the erosion rate increased significantly to the high level of the hard metal substrate after the coatings were penetrated. The results indicated that the TiN coating deposited at 150V bias had the lowest erosion wear rate and best wear resistance. The failure mechanism was revealed by examining the surface morphology of the coatings before and after the erosion test. The erosion wear of the TiN coatings behaved as typical brittle materials.Keywords
This publication has 25 references indexed in Scilit:
- Structural characterization and mechanical properties of Ti–Zr–N coatings, deposited by vacuum arcSurface and Coatings Technology, 2004
- Tribological properties of (Ti,Al)N coatings deposited at different bias voltages using the cathodic arc techniqueSurface and Coatings Technology, 2001
- A formation mechanism for the macroparticles in arc ion-plated TiN filmsThin Solid Films, 2001
- Nanograined Titanium Nitride Thin FilmsAdvanced Materials, 1998
- The tribological characteristics of titanium nitride, titanium carbonitride and titanium carbide coatingsThin Solid Films, 1997
- Abrasive wear of titanium nitride coatingsWear, 1997
- Ion energy measurements in vacuum arc depositionIEEE Transactions on Plasma Science, 1997
- Control of film properties during filtered arc depositionSurface and Coatings Technology, 1996
- Microstructural investigation of droplets in arc-evaporated TiN filmsSurface and Coatings Technology, 1994
- Technical note: A review of cathodic arc plasma deposition processes and their applicationsSurface and Coatings Technology, 1987