Synergistic effects of surface heat treatment and friction modifiers on the wear resistance of QT tribo-pairs under boundary lubrication conditions
- 1 September 2026
- journal article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- p. 1-14
Abstract
Purpose: Plunger pairs in emulsion pumps typically operate under extreme boundary lubrication conditions, resulting in severe wear issues. Existing studies have often examined material selection, heat treatment and lubrication independently, without adequately addressing their synergistic interactions. To bridge this gap, this work aims to systematically investigate the combined influence of these factors on tribological performance. Design/methodology/approach: Using QT600 and QT400 ductile irons, specimens with varying hardness were prepared through heat treatment and subsequently paired with nitrided counterparts. Tribological tests were performed under simulated service conditions using gear oil containing 1.5 Wt.% molybdenum dialkyldithiophosphate. Wear mechanisms were characterized via scanning electron microscopy and energy dispersive spectroscopy. Findings: The results indicate that the nitrided layer underwent microfracture and delamination, which aggravated abrasive wear. In contrast, heat treatment significantly enhanced wear resistance. The most favorable performance was observed when the spherical specimen possessed higher hardness than the disc specimen, a configuration that stabilized contact conditions and facilitated the formation of a protective tribofilm. Originality/value: This study highlights the critical roles of mechanical compatibility and surface-lubricant synergy in wear mitigation, demonstrating that tailored heat treatment can effectively optimize the performance of friction pairs and inform the design of advanced lubrication systems. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2026-0110/Keywords
Funding Information
- TMIC Project (2024-TM-019-J1)
- TMIC Project (2022TM-167M)
- CCTEG projects (2023-TD-MS015)
- CCTEG projects (2023-TD-QN004)
- CCTEG projects (2025-TD-QZ008)
- National Natural Science Foundation of China (52205206)
This publication has 39 references indexed in Scilit:
- Impact Toughness of High-Strength Low-Alloy Steels Joined by Friction STIR WeldingRussian Physics Journal, 2024
- Nanomaterials for lubricating oil application: A reviewFriction, 2023
- Mechanochemical reactions of GaN-Al2O3 interface at the nanoasperity contact: Roles of crystallographic polarity and ambient humidityFriction, 2021
- The Synergetic Effects of Surface Texturing and MoDDP Additive Applied to Ball-on-Disk Friction Subject to Both Flooded and Starved Lubrication ConditionsTribology Letters, 2017
- Friction Modifier AdditivesTribology Letters, 2015
- Control strategy for multi-pump emulsion power station in coal mine faceJournal of Coal Science and Engineering (China), 2011
- Wear Characteristics and Mechanisms of H13 Steel with Various Tempered StructuresJournal of Materials Engineering and Performance, 2010
- Effect of MoDDP on the antioxidative properties of ZnDDP in mineral oilLubrication Science, 2004
- Tribochemistry of ZDDP and MoDDP chemisorbed filmsTribology Letters, 1996
- Power law fluid model incorporated into elastohydrodynamic lubrication theory of line contactTribology International, 1996