Integration technologies for a medium voltage modular multi-level converter with hot swap capability
Authors:
- 1 September 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 4502-4509
Abstract
Recent development in modular converter topologies have raised the discussion about exploiting the inherent redundancy of such converters in order to maximize their availability. One such solution involves the replacement of power electronic building blocks (PEBBs) during operation, a procedure also referred to as `hot swap'. Hot swap is considered as state-of-the-art in today's IT systems and low voltage power supplies. At medium voltage however, hot swap is getting more demanding, mainly because of the higher voltages and because of the often series connected PEBBs. In this paper we therefore present dedicated integration technologies addressing the required pluggability and insulation of PEBBs, and therefore enabling hot swap at medium voltage. The technologies developed cover auxiliary power supply, cooling, communication and insulation, and are demonstrated under real conditions in a full scale medium voltage concept converter. Hot swap was successfully demonstrated at a DC-link voltage of 3.4 kV, an output current of 460 Arms and an output power of 0.55 MW.Keywords
This publication has 11 references indexed in Scilit:
- Inductive power transfer for auxiliary power of medium voltage converters2015
- Analysis of the $N$ -Cell Single Phase MMC Natural Balancing MechanismIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- Compact Gravity Driven and Capillary-Sized Thermosyphon Loop for Power Electronics CoolingJournal of Thermal Science and Engineering Applications, 2014
- Design for Efficiency Optimization and Voltage Controllability of Series–Series Compensated Inductive Power Transfer SystemsIEEE Transactions on Power Electronics, 2014
- L-Shaped Thermosyphon Loop with Vertical Evaporator for Power Electronics Cooling2014
- Hochspannungstechnik2009
- On the modularity of manufacturing systemsIEEE Industrial Electronics Magazine, 2007
- Power Transfer Capability and Bifurcation Phenomena of Loosely Coupled Inductive Power Transfer SystemsIEEE Transactions on Industrial Electronics, 2004
- Assessment of high-heat-flux thermal management schemes2002
- Modularity in design of products and systemsIEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, 1998