On the delay-and-sum processing of shear wave signals from a scanning thermo-elastic laser ultrasound system
Open Access
- 1 August 2026
- journal article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 160 (2) , 1844-1858
Abstract
Scanning laser ultrasound (LU) systems capture sets of signals from different laser positions that may be combined using delay-and-sum (DAS) processing. The most common model used to calculate DAS delays for point-source systems assumes that ultrasound propagates in circular wavefronts. Vertically polarised shear wave (SV) signals from point-like, thermo-elastic LU sources are expected to violate this assumption due to phase rotation effects and the impact of SV head waves. This work explores the consequences of LU SV-SV wavefront non-circularity on DAS processing. Model SV-SV signal sets from point- and plane-reflectors are shown to interfere destructively during DAS when the circular wavefront model is applied, with a loss of 40% of the available signal predicted for an example plane reflector imaging scenario. Signal sets from experiments reproducing the modelled scenarios validate these predictions, with 51% signal loss observed in the corresponding plane reflector scenario. Phase compensation factors derived from the analytical models are applied to the experimental signals but are not found to improve phase coherence, indicating disparities between the models and experiments. An alternative delay model considering a shuttlecock-shaped pre-reflection SV wavefront is shown to yield signals up to 1.8 times those obtained using the circular wavefront model.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/S023275/1)
- Engineering and Physical Sciences Research Council (EP/T012862/1)
- Engineering and Physical Sciences Research Council (EP/V051814/1)
This publication has 38 references indexed in Scilit:
- Multi-mode high resolution TFM imaging of microdefects based on laser ultrasonic full matrix captureOptics & Laser Technology, 2024
- Finite element modelling strategy for determining directivity of thermoelastically generated laser ultrasoundUltrasonics, 2024
- Near-surface defect detection in additively manufactured components using laser induced phased arrays with surface acoustic wave crosstalk suppressionMaterials & Design, 2023
- Laser-induced ultrasound imaging of multi metal laminate with complex interfaceMaterials & Design, 2023
- Suppressing artifacts in the total focusing method using the directivity of laser ultrasoundPhotoacoustics, 2023
- Pulsed-laser source characterization in laboratory seismic experimentsGeomechanics and Geophysics for Geo-Energy and Geo-Resources, 2021
- So you think you can DAS? A viewpoint on delay-and-sum beamformingUltrasonics, 2021
- Laser Induced Phased Arrays (LIPA) to detect nested features in additively manufactured componentsMaterials & Design, 2020
- Modulus of elasticity and Poisson's ratio of fiber-reinforced concrete in Colombia from ultrasonic pulse velocitiesJournal of Building Engineering, 2019
- Post-processing of the full matrix of ultrasonic transmit–receive array data for non-destructive evaluationNDT & E International, 2005