The Bearing Capacity of Circular Footings in Sand: Comparison between Model Tests and Numerical Simulations Based on a Nonlinear Mohr Failure Envelope
Authors:
Open Access
- 1 January 2012
- journal article
- research article
- Published by Hindawi Limited in Advances in Civil Engineering
- Vol. 2012, 1-10
Abstract
This paper presents the results of a series of triaxial tests with dry sand at confining pressures varying from 1.5 kPa to 100 kPa at relative densities of 0.20, 0.59, and 0.84. The results, which are in reasonable accordance with an equation given by Bolton, show that the friction angle is strongly dependent on the stress level and on the basis of the test results, a nonlinear Mohr failure criterion has been proposed. This yield criterion has been implemented in a finite element program and an analysis of the bearing capacity of a circular shaped model foundation, diameter 100 mm, has been conducted. Comparisons have been made with results from 1g model scale tests with a foundation of similar size and a good agreement between numerical results and test results has been found.Keywords
Funding Information
- Lida
This publication has 18 references indexed in Scilit:
- A variational principle of elastoplasticity and its application to the modeling of frictional materialsInternational Journal of Solids and Structures, 2009
- Numerical Simulation of Bearing Capacity Characteristics of Strip Footing on SandSoils and Foundations, 1999
- Influence of relative density and stress level on the bearing capacity of sandsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1993
- Limit load in translational failure mechanisms for associative and non-associative materialsGéotechnique, 1993
- Slope stability analyses for materials with a non‐linear failure envelopeInternational Journal for Numerical and Analytical Methods in Geomechanics, 1988
- The strength and dilatancy of sandsGéotechnique, 1986
- Geotechnical model tests of bearing capacity problems in a centrifugeGéotechnique, 1985
- Strength and Deformation Characteristics of Saturated Sand at Extremely Low PressuresSoils and Foundations, 1984
- The influence of confining pressure on the shear strength of compacted rockfillGéotechnique, 1980
- Reflections on design decisions of practical significance to embankment damsGéotechnique, 1977