Effects of 3D-printed PLA material with different filling densities on coefficient of friction performance
Authors:
- 13 July 2022
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 29 (1) , 157-165
Abstract
Purpose: The purpose of this study is the investigation of the friction performance of 3D-printed polylactic acid (PLA) at different infill densities. Design/methodology/approach: PLA samples were printed with fused filament fabrication (FFF). Friction performance test of PLA samples were performed under 18 N load at 20 min, 40 min and 60 min using a pin-on-disc tester. Diameter deviation, hardness of 3D-printed PLA, weight variation, coefficient of friction, temperature and wear images were chosen as performance criteria. Findings: The hardness values of the samples with 30%, 50% and 70% infill density were determined as 93.9, 99.93 and 102.67 Shore D, respectively. The friction of coefficient values obtained in these samples at 20 min, 40 min and 60 min were measured as 0.5737, 0.4454 and 0.3824, respectively. The least deformation occurred in the sample with 50% occupancy rate and during the test period of 20 min. Practical implications: The aim of this study was to determine the best friction performance of 3D-printed biodegradable and biocompatible PLA with different infill densities. Originality/value: In the literature, several studies can be found on the mechanical characteristics of 3D-printed parts produced with PLA. However, investigations on the wear characterisation of these parts are very limited. In this regard, the friction coefficient results obtained from different infill density of 3D-printed PLA used in this study will significantly contribute to the literature.Keywords
This publication has 17 references indexed in Scilit:
- Changes of physical properties of PLA-based blends during early stage of biodegradation in compostInternational Journal of Biological Macromolecules, 2018
- Characterization of printed PLA scaffolds for bone tissue engineeringJournal of Biomedical Materials Research Part A, 2017
- Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid3D Printing and Additive Manufacturing, 2017
- Polylactic acid (PLA) controlled delivery carriers for biomedical applicationsAdvanced Drug Delivery Reviews, 2016
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive reviewAdvanced Drug Delivery Reviews, 2016
- Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisationJournal of Materials Processing Technology, 2015
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditionsMaterials & Design (1980-2015), 2014
- Characterisation of PCL and PCL/PLA Scaffolds for Tissue EngineeringProcedia CIRP, 2013
- Polylactides—Chemistry, Properties and Green Packaging Technology: A ReviewInternational Journal of Food Properties, 2011
- Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical propertiesPolymer Degradation and Stability, 2010