Corrosion behavior of the friction-stir-welded joints of 2A14-T6 aluminum alloy
Authors:
Open Access
- 6 June 2015
- journal article
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 22 (6) , 627-638
Abstract
The corrosion behavior of friction-stir-welded 2A14-T6 aluminum alloy was investigated by immersion testing in immersion exfoliation corrosion (EXCO) solution. Electrochemical measurements (open circuit potential, potentiodynamic polarization curves, and electrochemical impedance spectroscopy), scanning electron microscopy, and energy dispersive spectroscopy were employed for analyzing the corrosion mechanism. The results show that, compared to the base material, the corrosion resistance of the friction-stir welds is greatly improved, and the weld nugget has the highest corrosion resistance. The pitting susceptibility originates from the edge of Al-Cu-Fe-Mn-Si phase particles as the cathode compared to the matrix due to their high self-corrosion potential. No corrosion activity is observed around the θ phase (Al2Cu) after 2 h of immersion in EXCO solution.Keywords
This publication has 35 references indexed in Scilit:
- Effect of intermetallic phases on the anodic oxidation and corrosion of 5A06 aluminum alloyInternational Journal of Minerals, Metallurgy and Materials, 2015
- Temperature distribution study during the friction stir welding process of Al2024-T3 aluminum alloyInternational Journal of Minerals, Metallurgy and Materials, 2013
- Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methodsMaterials & Design (1980-2015), 2012
- Relationship between microstructure, microhardness and corrosion sensitivity of an AA 2024-T3 friction stir welded jointCorrosion Science, 2011
- Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456Materials Science and Engineering: A, 2009
- A look in the corrosion of aluminum alloy friction stir weldsScripta Materialia, 2008
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Correlation between microstructure and microhardness in a friction stir welded 2024 aluminium alloyScripta Materialia, 2005
- A comparison between FSW and TIG welding techniques: modifications of microstructure and pitting corrosion resistance in AA 2024-T3 butt jointsJournal of Materials Processing Technology, 2004
- Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIGInternational Journal of Fatigue, 2003