A 5.6 nV/ $\surd $ Hz Chopper Operational Amplifier Achieving a 0.5 $\mu$ V Maximum Offset Over Rail-to-Rail Input Range With Adaptive Clock Boosting Technique
Author:
- 28 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 51 (9) , 2119-2128
Abstract
This paper presents a standalone 5.6 nV/√Hz chopper op-amp that operates from a 2.1-5.5 V supply. Frequency compensation is achieved in a power-and area-efficient manner by using a current attenuator and a dummy differential output. As a result, the overall op-amp only consumes 1.4 mA supply current and 1.26 mm2 die area. Up-modulated chopper ripple is suppressed by a local feedback technique, called auto correction feedback (ACFB). The charge injection of the input chopping switches can cause residual offset voltages, especially with the wider switches needed to reduce thermal noise. By employing an adaptive clock boosting technique with NMOS input switches, the amount of charge injection is minimized and kept constant as the input common-mode voltage changes. This results in a 0.5 μV maximum offset and 0.015 μV/°C maximum drift over the amplifier's entire rail-to-rail input common-mode range and from -40 °C to 125 °C. The design is implemented in a 0.35 μm CMOS process augmented by 5 V CMOS transistors.Keywords
This publication has 8 references indexed in Scilit:
- A 21 nV/$\surd$Hz Chopper-Stabilized Multi-Path Current-Feedback Instrumentation Amplifier With 2 $\mu$V OffsetIEEE Journal of Solid-State Circuits, 2011
- A Micropower Chopper—CDS Operational AmplifierIEEE Journal of Solid-State Circuits, 2010
- Auto Correction Feedback for Ripple Suppression in a Chopper AmplifierIEEE Journal of Solid-State Circuits, 2010
- A Micropower Chopper-Stabilized Operational Amplifier Using a SC Notch Filter With Synchronous Integration Inside the Continuous-Time Signal PathIEEE Journal of Solid-State Circuits, 2006
- A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converterIEEE Journal of Solid-State Circuits, 1999
- Compact low-voltage power-efficient operational amplifier cells for VLSIIEEE Journal of Solid-State Circuits, 1998
- Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilizationProceedings of the IEEE, 1996
- A 100-MHz 100-dB operational amplifier with multipath nested Miller compensation structureIEEE Journal of Solid-State Circuits, 1992