Low-Frequency RFID Signal and Power Transfer Circuitry for Capacitive and Resistive Mixed Sensor Array
Open Access
- 14 June 2019
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 8 (6) , 675
Abstract
This paper presents a contactless measurement system for a mixed array of resistive and capacitive sensors exploiting a low-frequency radio-frequency identification (RFID)-based approach. The system is composed of a reader unit which provides power to and exchanges measurement data with a battery-less sensor unit. The sensor unit is based on a transponder operating at 134.2 kHz and a microcontroller. The microcontroller sequentially measures the elements of the sensor array composed of n capacitive and m resistive sensors which share a common terminal. The adopted technique measures the charging time of a resistor–capacitor (RC) circuit, where the resistor or the capacitor can be either the sensing element or a reference component. With the proposed approach, the measured values of the resistive or capacitive elements of the sensor array are first-order independent from the supply voltage level. A prototype has been developed and experimentally tested with resistive elements in the range 400 kΩ–1.2 MΩ and capacitive elements in the range 200 pF–1.2 nF showing measurement resolution values of 1 kΩ and 5 pF, respectively. Operative distances up to 3 cm have been achieved, with readings taken faster than one element of the array per second.Keywords
This publication has 36 references indexed in Scilit:
- A comprehensive review on piezoelectric energy harvesting technology: Materials, mechanisms, and applicationsApplied Physics Reviews, 2018
- Internet of Things (IoT): A review of enabling technologies, challenges, and open research issuesComputer Networks, 2018
- Review of Internet of Things (IoT) in Electric Power and Energy SystemsIEEE Internet of Things Journal, 2018
- Single- and multi-source battery-less power management circuits for piezoelectric energy harvesting systemsSensors and Actuators A: Physical, 2017
- A new nano-power trigger circuit for battery-less power management electronics in energy harvesting systemsSensors and Actuators A: Physical, 2017
- A comprehensive review on vibration energy harvesting: Modelling and realizationRenewable and Sustainable Energy Reviews, 2017
- A Low-Cost Snap-Through-Buckling Inkjet-Printed Device for Vibrational Energy HarvestingIEEE Sensors Journal, 2014
- Impact-Enhanced Multi-Beam Piezoelectric Converter for Energy Harvesting in Autonomous SensorsProcedia Engineering, 2012
- Nonlinear Multi-Frequency Converter Array for Vibration Energy Harvesting in Autonomous SensorsProcedia Engineering, 2012
- Sensors and energy harvesters based on piezoelectric thick filmsProcedia Engineering, 2011