COMPARATIVE ANALYSIS OF THE COMPLEX OF PROPERTIES OF NICKEL-BASED SUPERALLOY
Open Access
- 25 March 2025
- journal article
- Published by National University "Zaporizhzhia Polytechnic" in New Materials and Technologies in Metallurgy and Mechanical Engineering
- No. 1,p. 13-23
Abstract
Purpose. To conduct comparative studies of the complex of physico-mechanical properties of the imported alloy N-155 and the domestic alloy ЗМІ-11 in order to increase the service life of the rotating blades. To conduct comparative tests on the short-term and long-term strength of the alloys in the initial state (after heat treatment), to conduct comparative tests on the short-term and long-term strength of the alloys after prolonged thermal action at T = 850 °C, 950 °C for 1000, 3000, 5000 hours and to conduct research by metallographic method and micro-X-ray spectral analysis of the microstructure and phase composition of the alloys. Research methods. Alloy samples were made from ingots weighing 10 kg in a vacuum induction furnace УППФ-3M in an argon environment at a pressure of 1.4–5.3 Pa in crucibles with the main lining with simultaneous pouring of samples of equiaxed crystallization. Chemical analysis was carried out by standard methods in accordance with the requirements of TU 14-1689-73 and OST 1.90127-85. Microstructure studies were carried out on microsections, the plane of which was oriented normal to the surface on a light optical microscope “Olympus IX-70” with a digital video camera “ExwaveHAD color video camera Digital Sony” at magnifications ×200, ×500, ×1000. Strength tests (GOST 1497-61, GOST 9651-61, GOST 1497-84) were carried out on standard cylindrical samples (diameter of the working part 5 mm, length 25 mm) at temperatures 200, 800, 900 and 1000°C on a УМЕ-10TM brand tensile machine. Long-term strength tests (GOST 10145-81) were carried out on standard cylindrical samples at temperatures 800, 900, 10000 °C and corresponding loads 600, 400, 180 MPa on an AIMA-5-2 machine. Obtained results. It was found that during tests at 800 and 900°С, the tensile strength of the N-155 alloy is 1.2 times lower than that of ЗМІ-11, and the long-term strength is 5.2 times lower, respectively. It was shown that the amount of the strengthening phase in the ЗМІ-11 alloy is 6…10 % more, evenly distributed throughout the alloy body. It was established that in the composition of the strengthening phase of the ЗМІ-11 alloy, the concentration of chromium, tungsten, and molybdenum remains practically unchanged and does not depend on the presence of niobium. At the same time, in the composition of the strengthening phase of the ЗМІ-11 alloy, the concentration of cobalt increases by 1.4 times, and the concentration of aluminum and titanium decreases by 1.1 times compared to the N-155 alloy. It was established that in the process of dissolving non-equilibrium eutectic precipitates, microvolumes arise, locally supersaturated with tungsten, chromium, and titanium, in which the probability of the formation of carbides on a more complex basis increases. It was found that during prolonged thermal action carbides based on tantalum TaC and on a mixed basis (Ta, Ti) C in the ЗМІ-11 alloy are thermally more stable than carbides in the N-155 alloy. Scientific novelty. The obtained results allow us to understand the thermodynamics of phase formation processes in two alloying systems and to establish the relationships between alloying elements concentration and the phase composition of the alloy. Practical value. The obtained results allow us to recommend the domestic ЗМІ-11 as a substitute for the foreign alloy N-155 without loss of properties and service life.Keywords
This publication has 10 references indexed in Scilit:
- A Fast-Acting Method for Simulating Precipitation During Heat Treatment of Superalloy 718Metallurgical and Materials Transactions A, 2021
- High-Temperature Salt Corrosion of a Heat-Resistant Nickel AlloyMaterials Science, 2020
- Distribution of Alloying Elements in the Structure of Heat-Resistant Nickel Alloys in Secondary CarbidesJournal of Applied Spectroscopy, 2020
- Modelling the composition of carbides in nickel-based superalloys of directional crystallizationJournal of Achievements in Materials and Manufacturing Engineering, 2020
- Development of Corrosion and Heat-Resistant Nickel Alloys and their Production Technology with the Aim of Import SubstitutionPower Technology and Engineering, 2020
- The Effects of Chemistry Variations in New Nickel-Based Superalloys for Industrial Gas Turbine ApplicationsMetallurgical and Materials Transactions A, 2020
- Role of script MC carbides on the tensile behavior of laser-welded fusion zone in DZ125L/IN718 joints at 650 °CJournal of Materials Science, 2020
- Microstructure and mechanical properties of a new cast nickel-based superalloy K4750 joint produced by gas tungsten arc welding processJournal of Materials Science, 2018
- Transformation Mechanism of (γ + γ′) and the Effect of Cooling Rate on the Final Solidification of U720Li AlloyActa Metallurgica Sinica (English Letters), 2017
- Microstructure-Property Relationship in Advanced Ni-Based Superalloys2012