Oxidation of stainless steel under dry and aqueous conditions: oxidation behaviour and composition
Authors:
- 1 August 2002
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 34 (1) , 164-170
Abstract
The oxidation of austenitic stainless steel (316Ti) under dry oxidation and under pressurized aqueous conditions, both at ∼300°C, was studied by applying XPS, depth profiling and x‐ray diffraction. After dry oxidation a relatively smooth surface was found, depleted of chromium, nickel and molybdenum and leaving behind nearly exclusively iron oxides. In the oxide layer chromium oxides were detected, followed by metallic nickel and molybdenum. The growth of the whole oxide layer follows a logarithmic growth law. Under aqueous conditions a rougher surface was found, with oxide layers being a factor of ≥10 thicker than under dry oxidation conditions. A greater variety of the oxides were found, e.g. chromium and nickel oxides and hydroxides are present in considerable amounts already at the sample surfaces. Again, molybdenum is first detected in the oxide layer. During the first 60 days of steel oxidation in pressurized water, the oxide layer formation follows a parabolic growth law. Copyright © 2002 John Wiley & Sons, Ltd.Keywords
This publication has 13 references indexed in Scilit:
- Indication of Chromium Oxide Hydroxide Evaporation During Oxidation of 304L at 873 K in the Presence of 10% Water VaporOxidation of Metals, 1999
- XPS, SEM and TEM characterization of stainless-steel 316L surfaces after electrochemical etching and oxidizingSurface and Interface Analysis, 1999
- Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular methodApplied Surface Science, 1998
- XPS analysis of oxidesSurface and Interface Analysis, 1988
- An XPS study of passive film formation on iron in chromate solutionsCorrosion Science, 1988
- Thickness of natural oxide films determined by AES and XPS with/without sputteringJournal of Vacuum Science & Technology A, 1985
- CHARACTERIZATIONS OF PASSIVE FILMS FORMED ON STAINLESS STEEL IN HIGH TEMPERATURE WATER1983
- The use of in the x-ray photo-electron spectroscopy analyses of passive layers on stainless steelCorrosion Science, 1977
- ESCA studies of the composition profile of low temperature oxide formed on chromium steels—II. Corrosion in oxygenated waterCorrosion Science, 1975
- Esca-studies of the composition profile of low temperature oxide formed on chromium steels—I. Oxydation in dry oxygenCorrosion Science, 1975