Physical properties of Poly(L-lactic acid) fabricated using salicylic hydrazide derivative with tetraamide structure
Authors:
- 6 June 2019
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 59 (2) , 117-129
Abstract
With the aim of overcoming the slow crystallization rate of Poly(L-lactic acid) (PLLA), a heterogeneous nucleating agent, N, N, N, N’-salicylic tetra(1, 2, 4, 5-benzenetetracarboxylic acid) hydrazide (BAS), was synthesized to accelerate the crystallization of PLLA in this work. The effects of BAS on the non-isothermal crystallization, melting behavior, thermal stability, the fluidity and optical property of PLLA were evaluated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), melt index instrument and light transmittance meter. DSC results from the non-isothermal crystallization behavior revealed that BAS acted as an excellent crystallization promoter for promoting the nuclear of PLLA. Upon the cooling of 1°C/min from the melt of 190°C, 3 wt% exhibited the best accelerating effect on the melt-crystallization of PLLA. Even the BAS as a high-efficient nucleating agent could significantly promote the crystallization of PLLA upon fast cooling at 20°C/min. Additionally, the final melting temperature was another important factor for the crystallization process, and the 200°C is the best melting temperature for melt-crystallization of PLLA. The studies on the cold-crystallization process and melting behavior of PLLA/BAS samples under different conditions further confirmed the heterogeneous nucleating effect of BAS. And for the melting behavior of PLLA/BAS, both the crystallization temperatures and heating rates affected the melting behavior, and the double-melting peaks were assigned to melting-recrystallization. Overall, the addition of BAS could effectively improve the thermal stability and fluidity comparing with the primary PLLA, but decrease the light transmittance of PLLA. Synthesis of nucleating agent N, N, N, N’-salicylic tetra(1, 2, 4, 5-benzenetetracarboxylic acid) hydrazide for promoting the crystallization of Poly(L-lactic acid)Keywords
Funding Information
- National Natural Science Foundation of China (51403027)
- Foundation of Yongchuan District (Ycstc, 2017nc4002)
- Foundation of Chongqing Municipal Science and Technology Commission (cstc2015jcyjBX0123)
- Scientific and Technological Research Program of Chongqing Municipal Education Commission (KJQN201801319)
This publication has 36 references indexed in Scilit:
- Nucleating effect and crystal morphology controlling based on binary phase behavior between organic nucleating agent and poly(l-lactic acid)Polymer, 2015
- Enhancing Thermomechanical Properties and Heat Distortion Resistance of Poly(l-lactide) with High Crystallinity under High Cooling RateACS Sustainable Chemistry & Engineering, 2015
- Synergistic effects of N, N′‐bis (benzoyl) sebacic acid dihydrazide and talc on the physical and mechanical behaviors of poly(l‐latic acid)Journal of Applied Polymer Science, 2014
- Crystalline properties of poly(L-lactic acid) composites filled with nanometer calcium carbonateComposites Part B: Engineering, 2013
- Crystallization behavior and crystallite morphology control of poly(L‐lactic acid) through N, N′‐bis(benzoyl)sebacic acid dihydrazidePolymer International, 2012
- Crystallization behavior and nucleation analysis of poly(l‐lactic acid) with a multiamide nucleating agentPolymer Engineering & Science, 2011
- Biodegradable poly(l-lactide)/poly(ɛ-caprolactone)-modified montmorillonite nanocomposites: Preparation and characterizationPolymer, 2007
- Surface-grafted silica linked with l-lactic acid oligomer: A novel nanofiller to improve the performance of biodegradable poly(l-lactide)Polymer, 2007
- Non‐Isothermal Crystallization Behavior of Poly(L‐lactic acid) in the Presence of Various AdditivesMacromolecular Materials and Engineering, 2006
- Multiple melting behavior of poly(butylene succinate). I. Thermal analysis of melt‐crystallized samplesJournal of Polymer Science Part B: Polymer Physics, 2002