Drilling and 4D seismic calibrated geomechanical model: Enabling extended-reach drilling well design in complex subsalt GOM play
Authors:
- Zhao Chad KongZKZhao Chad Kong
- Samarjit ChakrabortySCSamarjit Chakraborty
- Christopher WalkerCWChristopher Walker
- Vasudev SinghVSVasudev Singh
- Martin AlbertinMAMartin Albertin
- 1 September 2016
- conference paper
- Published by Society of Exploration Geophysicists
- Vol. 1, 5415-5419
Abstract
Deepwater U.S Gulf of Mexico remains one the world’s most prolific producing regions. However the complex geological setting created by the salt tectonics presents multiple technical challenges for drilling. The characterization of highly variable pore pressure, overburden stress and salt-induced stress perturbations requires advanced methods of geomechanical modelling. To address these challenges, we have employed a calibrated 4D finite element (FEM) geomechanical model. The model shows stress variations, in both magnitude and direction, induced by the varying overburden, presence of faults and, most importantly, near salt. Stresses were highly dependent on salt body geometry, with higher compressive values found closer to the salt body. Away from and below the salt, the stress regime returns to a more normal ‘relaxed’ state. The field wide stress calculation is substantiated by two independent field observations. Firstly, simulated stress values were corroborated with observed losses during casing and cementing. Secondly, observed time-lapse seismic shifts associated with reservoir compaction and overburden elongation agreed with compaction features and magnitude simulated by the model. This 3D/4D stress characterization overcomes many of the limitations of the traditional 1D geomechanical modeling assumptions and provides a richer input for drilling design and decisions. Presentation Date: Wednesday, October 19, 2016 Start Time: 10:20:00 AM Location: 146 Presentation Type: ORALKeywords
This publication has 8 references indexed in Scilit:
- Atlantis ocean bottom nodes time-lapse observations2013
- Seismic Geomechanics: How to Build and Calibrate Geomechanical Models using 3D and 4D Seismic Data2011
- History Matched Full Field Geomechanics Model of the Valhall Field Including Water Weakening and Re-Pressurisation2010
- Atlantis time‐lapse ocean bottom node survey: a project team's journey from acquisition through processing2010
- Monitoring pressure depletion and improving geomechanical models of the Shearwater Field using 4D seismicThe Leading Edge, 2007
- Field design and operation of a novel deepwater, wide-azimuth node seismic surveyThe Leading Edge, 2007
- Rocks under strain: Strain-induced time-lapse time shifts are observed for depleting reservoirsThe Leading Edge, 2005
- Drilling Wellbore Stability in the Compacting and Subsiding Valhall Field2004