Chemical treatment of wood fiber and its reinforced unsaturated polyester composites
Authors:
- 7 February 2013
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 19 (1) , 18-24
Abstract
In order to enhance the interfacial adhesion between wood fiber and an unsaturated polyester matrix ( UPE ), acrylic acid (acrylic acid)/poly(methyl methacrylate), and (acrylic acid)/silanization ( AAS ) were used to treat the wood fibers. The mechanical properties and the impact fracture surfaces of the prepared composites were measured and characterized, and the fracture mechanism of these kinds of composites was analyzed. The results showed that the AAS composites possessed the optimum comprehensive mechanical properties. When the weight fraction of wood fiber was 16%, the flexural strength and flexural modulus of the AAS composites were increased by 28.9 and 51.8%, respectively, compared to those of untreated composites. The highest tensile strength and lowest water absorption were also noted for AAS composites. These composites possessed the strongest interfacial adhesion between wood fiber and the UPE matrix. J. VINYL ADDIT. TECHNOL., 19:18–24, 2013. © 2013 Society of Plastics EngineersKeywords
This publication has 34 references indexed in Scilit:
- Mechanical properties of natural fibers reinforced polyester hybrid compositeInternational Journal of Plastics Technology, 2010
- Analysis of Dry Sliding Wear Behavior of Red Mud Filled Polyester Composites using the Taguchi MethodJournal of Reinforced Plastics and Composites, 2008
- The effect of alkali treatment and filler size on the properties of sawdust/UPR composites based on recycled PET wastesJournal of Applied Polymer Science, 2008
- Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particlesComposites Science and Technology, 2008
- Tribological properties of epoxy nanocompositesWear, 2005
- Chemical modification of hemp, sisal, jute, and kapok fibers by alkalizationJournal of Applied Polymer Science, 2002
- Modified woodflour as thermoset fillersPart I. Effect of the chemical modification and percentage of filler on the mechanical propertiesPolymer, 2001
- Novel low-cost jute-polyester composites. III. Weathering and thermal behaviorJournal of Applied Polymer Science, 2000
- Environmental Durability of Flax Fibres and their Composites based on Polypropylene MatrixApplied Composite Materials, 2000
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000