Analysis of mechanical properties of Al2O3‐cBN‐hBN composites and identification of main influencing factors
- 3 September 2022
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 19 (6) , 3255-3266
Abstract
Al2O3‐cBN‐hBN self‐lubricating ceramics were synthesized by using a high‐pressure sintering method. The mapping relationships between sintering thermodynamic conditions, component content, and mechanical properties were established using the response surface method. The main factors influencing the mechanical properties are clarified. The formation mechanism of the excellent mechanical properties is explained. It is found that the undesired phase transformation from cBN to soft hBN can be effectively inhibited by using a low‐temperature and high‐pressure sintering process. Sintering temperatures improve the relative densities and elastic modulus of self‐lubricating ceramic but have little effect on the hardness and fracture toughness. cBN content is the main factor affecting the mechanical properties of the composites. The microcracks developed during the high‐pressure sintering process contribute to the fracture toughness of the composites.Keywords
Funding Information
- National Natural Science Foundation of China (52073254)
This publication has 28 references indexed in Scilit:
- Quantitative measurements of pressure gradients for the pyrophyllite and magnesium oxide pressure-transmitting mediums to 8 GPa in a large-volume cubic cellHigh Pressure Research, 2011
- Spark plasma sintering of Al2O3–cBN composites facilitated by Ni nanoparticle precipitation on cBN powder by rotary chemical vapor depositionJournal of the European Ceramic Society, 2011
- A mechanical model for surface layer formation on self-lubricating ceramic compositesWear, 2010
- Densification and microstructure of Al2O3-cBN composites prepared by spark plasma sinteringJournal of the Ceramic Society of Japan, 2008
- Self-lubrication of sintered ceramic tools with CaF2 additions in dry cuttingInternational Journal of Machine Tools and Manufacture, 2006
- A Crossover in the Mechanical Response of Nanocrystalline CeramicsScience, 2005
- High‐Pressure Sintering of Nanocrystalline γAl 2 O 3Journal of the American Ceramic Society, 1996
- Grain Size Dependence of Hardness in Dense Submicrometer AluminaJournal of the American Ceramic Society, 1995
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981
- Fracture Toughness Determinations by IndentationJournal of the American Ceramic Society, 1976