A Correlation Between Acoustic Emission During SCC and Fractography of Cracking of the Zircaloys
Author:
- 1 June 1974
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 30 (6) , 191-202
Abstract
The fractography of all transgranular stress corrosion cracking (SCC) failures of the Zircaloys is generally similar and consists of areas of cleavage separated by regions of ductile tearing. Minor differences arise due to processes which occur after the crack front has passed (i.e., due to etching in some environments). Major differences are apparent between room temperature and high temperature [200 to 400C (392 to 752F)] fractures in the nature of the ductile process which interconnects the regions of cleavage. Two types of acoustic emission have been recorded during SCC tests: (1) A continuous swishing noise, which control experiments have shown to arise either from electrochemical noise or from dislocation generation during plastic deformation, and (2) a discontinuous, cracking noise, which may result from either brittle crack propagation, oxide film cracking, or twinning. Since •neither type of acoustic emission can be related uniquely to a single process which is occurring, its diagnostic value in the SCC of hexagonal metals is apparently limited.Keywords
This publication has 7 references indexed in Scilit:
- Stress Corrosion Cracking of Zircaloy-2 in Neutral Aqueous Chloride Solutions at 25 CCorrosion, 1973
- Environmentally Induced Cracking of Zirconium AlloysCorrosion, 1972
- Interpretation of Fractographs of SCC in Hexagonal MetalsCorrosion, 1972
- Stress-Corrosion Cracking of High-Strength Aluminum Alloys1972
- Catastrophic oxidation of zircaloys in fused salts at 300 COxidation of Metals, 1971
- On the discontinuous nature of stress-corrosion cracking in titanium alloysInternational Journal of Fracture, 1970
- Stress Corrosion Cracking of Ti and Zr in HCl-Methanol SolutionsCorrosion, 1966