Reinforcement of Poly(ethylene terephthalate) Fibers with Polyhedral Oligomeric Silsesquioxanes (POSS)
Authors:
- J. ZengJZJ. Zeng
- S. KumarSKS. Kumar
- S. IyerSIS. Iyer
- 1 September 2005
- journal article
- research article
- Published by SAGE Publications in High Performance Polymers
- Vol. 17 (3) , 403-424
Abstract
Poly(ethylene terephthalate) (PET)-based composite fibers were prepared by melt spinning three types of PET/polyhedral oligomeric silsesquioxane (POSS) composites. These composites were made by either melt blending POSS with PET at 5 wt% loading level (non-reactive POSS and silanol POSS) or by in-situ polymerization with 2.5 wt% reactive POSS. Significant increases in tensile modulus and tensile strengths were achieved in PET fibers with non-reactive POSS at room temperature. The hightemperature modulus retention was found to be much better for PET/silanol POSS fiber when compared to that of control PET. Although other PET/POSS nancomposite fibers tested did not show this high retention of modulus at elevated temperatures, PET/isooctylPOSS nanocomposite fibers did show increased modulus at elevated temperature compared to that of PET. Higher compressive strengths, compared to PET fibers, were observed for all three nanocomposite fibers. Gel permeation chromatography measurement suggested that there is no significant change in molecular weight during preparation of PET/POSS nanocomposites. SEM observations suggest that there is no obvious phase separation in any of the three PET/POSS systems. Crystallization behavior and thermal stability of the composite were also studied. The fiber spinning and mechanical performance with 10 and 20 wt% of trisilanolisooctyl POSS2 were also investigated1 the composites with higher concentrations of this nanofiller can be spun without any difficulty. At room temperature, the fiber tensile modulus increased steadily with the POSS concentration while fiber tensile strength showed no significant change. The elongation at break decreased significantly with increasing of POSS concentration. The high-temperature moduli of PET/POSS nanocomposite fibers were found to be rather variable, likely due to the modest compatibility between filler and polymers, which can lead to structural anisotropy within the composite.Keywords
This publication has 26 references indexed in Scilit:
- X-ray Characterizations of Polyethylene Polyhedral Oligomeric Silsesquioxane CopolymersMacromolecules, 2002
- Synthesis and thermal properties of hybrid copolymers of syndiotactic polystyrene and polyhedral oligomeric silsesquioxaneJournal of Polymer Science Part A: Polymer Chemistry, 2002
- Viscoelastic and Mechanical Properties of Epoxy/Multifunctional Polyhedral Oligomeric Silsesquioxane Nanocomposites and Epoxy/Ladderlike Polyphenylsilsesquioxane BlendsMacromolecules, 2001
- Novel Polyolefin Nanocomposites: Synthesis and Characterizations of Metallocene-Catalyzed Polyolefin Polyhedral Oligomeric Silsesquioxane CopolymersMacromolecules, 2001
- Crystallization studies of isotactic polypropylene containing nanostructured polyhedral oligomeric silsesquioxane molecules under quiescent and shear conditionsJournal of Polymer Science Part B: Polymer Physics, 2001
- Synthesis of polyethylene hybrid copolymers containing polyhedral oligomeric silsesquioxane prepared with ring‐opening metathesis copolymerizationJournal of Polymer Science Part A: Polymer Chemistry, 2001
- New Insightl into the Structure-Property Relationships of Hybrid (Inorganic/Organic) Poss™ ThermoplasticsMRS Proceedings, 2000
- Thermal and viscoelastic property of epoxy-clay and hybrid inorganic-organic epoxy nanocompositesJournal of Applied Polymer Science, 1999
- Polyhedral oligomeric silsesquioxane(POSS)-based polymersApplied Organometallic Chemistry, 1998
- Polyhedral Oligomeric Silsesquioxanes: Building Blocks for Silsesquioxane-Based Polymers and Hybrid MaterialsComments on Inorganic Chemistry, 1995