Effect of substrate surface roughness on the wear of molybdenum disulphate coated rolling contact bearings
Authors:
- 1 September 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 63 (9) , 848-854
Abstract
The objective of the present experimental work is to investigate the influence of subsurface roughness on the friction and wear performance of high-temperature ball bearing. Bearings, which are used in high-temperature applications, are affected by several operating conditions. Some factors under high-temperature conditions such as short grease life, thin-film thickness at low speed, and insufficient internal clearance can drastically reduce bearing service life due to an increase in surface friction. For this reason, rolling contact bearings are coated with molybdenum disulfide. Before the molybdenum disulfide (MoS2) coating, phosphatization is applied to the bearings. Because the phosphate layer is micro-porous, it assures that molybdenum disulfide is entrapped in the interstitials between the phosphates. Also, phosphate coating provides a much larger surface area for the lubricant to attach to. In this study, several process steps, sandblasting, manganese phosphate coating, molybdenum disulfide coating, friction moment testing, wear testing, wear depth measurement, SEM, and XRD analyses were carried out. Wear tests and friction moment tests were applied to the rings of bearings of varied raceway roughness. This process ultimately provides molybdenum disulfide coated bearings optimum raceway roughness parameters for good wear resistance and optimum boundary lubrication.Keywords
This publication has 25 references indexed in Scilit:
- Structural, mechanical and tribological properties of Mo–S–C solid lubricant coatingSurface and Coatings Technology, 2011
- Tribological properties of Cr- and Ti-doped MoS2 composite coatings under different humidity atmosphereSurface and Coatings Technology, 2010
- An investigation of friction and wear performances of bonded molybdenum disulfide solid film lubricants in fretting conditionsWear, 2009
- Evaluation of adhesion and fatigue of MoS2–Nb solid-lubricant films deposited by pulsed-dc magnetron sputteringSurface and Coatings Technology, 2008
- Pulsed laser-ablated MoS2-Al films: friction and wear in humid conditionsSurface and Coatings Technology, 2004
- Wear life mechanism of journal bearings with bonded MoS2 film lubricants in air and vacuumWear, 2001
- Mechanical and tribological performance of MoS2 co-sputtered compositesSurface and Coatings Technology, 2000
- Tribological behaviour of high performance MoS2 coatings produced by magnetron sputteringSurface and Coatings Technology, 1997
- Structure of Sputtered Molybdenum Disulfide Films at Various Substrate TemperaturesA S L E Transactions, 1974
- Surface aspects of unlubricated metal-to-metal wearWear, 1971