Etching Characteristics of Manganese-Doped Zinc Sulfide Film Using Cl2/CF4 Inductively Coupled Plasma
Authors:
- Sun Jin YunSYSun Jin Yun
- Yong-Eui LeeYLYong-Eui Lee
- 1 May 2004
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 43 (5R)
Abstract
The etching characteristics of manganese-doped zinc sulfide (ZnS:Mn) films were investigated using the inductively coupled plasma (ICP) of Cl2/CF4 gas mixture. The chemical surface reaction of ZnS:Mn etching with Cl2/CF4 ICP plasma was studied by plasma analysis using the Langmuir probe (LP) method and optical emission spectroscopy (OES), and surface analysis using X-ray photoelectron spectroscopy (XPS). The maximum ion saturation current was obtained with a gas mixture of 30% CF4-70% Cl2 and the ion current of pure Cl2 plasma was higher than that of pure CF4-plasma. The etch rate of ZnS gradually decreased with increasing flow rate of CF4 gas at a fixed total flow rate. XPS indicated that Mn had accumulated on the surface after etching of the ZnS:Mn (0.39 wt.%) layer using Cl2 plasma. The OES analysis of Cl2/CF4 plasma revealed the presence of C–Cl and CF2 radicals as well as Cl and F atoms.Keywords
This publication has 4 references indexed in Scilit:
- Fabrication of CaS:Pb blue phosphor by incorporating dimeric Pb2+ luminescent centersApplied Physics Letters, 2001
- Electron cyclotron resonance plasma etching of oxides and SrS and ZnS-based electroluminescent materials for flat panel displaysJournal of Vacuum Science & Technology A, 1998
- Reactive ion etching of ZnS films for thin-film electroluminescent devicesMaterials Chemistry and Physics, 1997
- Hydrogen based reactive ion etching of zinc sulfideJournal of Vacuum Science & Technology A, 1992