Effects of modified silica on morphology, mechanical property, and thermostability of injection-molded polycarbonate/silica nanocomposites
- 31 January 2014
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 33 (10) , 911-922
Abstract
Nanocomposites of polycarbonate filled with untreated and modified silica nanoparticles were melt mixed and injection molded with a low melt temperature. The effects of modified silica and low-temperature melting on the morphology, mechanical property, and thermostability of composites were investigated. Scanning electron microscope images showed that uniform dispersion of agglomerates was formed by low-temperature melt blending. A slight reinforcing and toughening effect on tensile behavior of composites was obtained, and the modification of nanoparticles made the effect more remarkable. The storage modulus of composites measured by dynamic mechanical analysis increased observably as a function of silica content, especially for the composites with modified silica, but the Tg value changed little. Thermogravimetric analysis presented that thermostability improved dramatically after adding silica nanoparticles. In addition, the incorporation of modified silica into matrix showed a more significant improvement in thermostability at low loading.Keywords
This publication has 36 references indexed in Scilit:
- A strategy for achieving low percolation and high electrical conductivity in melt-blended polycarbonate (PC)/multiwall carbon nanotube (MWCNT) nanocomposites: Electrical and thermo-mechanical propertiesExpress Polymer Letters, 2013
- Nanoindentation measurements of fumed silica epoxy reinforced nanocompositesJournal of Reinforced Plastics and Composites, 2012
- Effects of structure characteristics of carbon nanotubes on properties of compositesJournal of Reinforced Plastics and Composites, 2012
- Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide–ethanol mixtureJournal of Materials Science, 2009
- Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer compositesComposites Part B: Engineering, 2008
- Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and ApplicationsChemical Reviews, 2008
- Polymer nanotechnology: NanocompositesPolymer, 2008
- PMMA‐grafted‐silica/PVC nanocomposites: Mechanical performance and barrier propertiesJournal of Applied Polymer Science, 2008
- Polymer/silica nanocomposites prepared via extrusionPolymers for Advanced Technologies, 2006
- Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene compositesPolymer, 2001