Effect of Alkyl Phenol from Cashew Nutshell Liquid and Sisal Fiber Reinforcement on Dry Sliding Wear Behavior of Epoxy Resin
Authors:
- 17 February 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 14 (5) , 747-758
Abstract
A phenalkamine made from the reaction of alkyl phenol from cashew nut shell liquid (CNSL) and alkaylamine was added at three different weight percentages (30%, 40%, and 50%) as a hardener for curing the epoxy polymer. The effect of phenalkamine concentrtation on mechanical and dry sliding wear resistance properties were compared to synthetic aliphatic amine (TETA) cured epoxy network. It was obsererved that incorporation of phenalkamine improves the dry sliding wear resistance property of the epoxy network along with the impact strength and elongation properties. Epoxy composites incorporating sisal fiber placed unidirectionally (either parallel, anti-parallel, or perpendicular to the sliding direction) were prepared in a vacuum infusion process using phenalkamine as a crosslinking agent. It was observered that wear resistance of longitudinally oriented fibers composite was found to be higher owing to the area of fibers exposed to sliding asperities being smaller. With the goal to understand the brittleness behavior of epoxy networks, fractured surfaces of the epoxy networks were analyzed using optical microscope. A correlation was found between the mechanical and wear resistance properties of the epoxy networks.Keywords
This publication has 13 references indexed in Scilit:
- Progress Report on Natural Fiber Reinforced CompositesMacromolecular Materials and Engineering, 2013
- In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibresMaterials & Design (1980-2015), 2013
- Biobased Epoxidized Vegetable Oils and Its Greener Epoxy Blends: A ReviewPolymer-Plastics Technology and Engineering, 2010
- Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid CompositesJournal of Composite Materials, 2010
- Effects of various fillers on the sliding wear of polymer compositesComposites Science and Technology, 2005
- Morphology and mechanical properties of unidirectional sisal– epoxy compositesJournal of Applied Polymer Science, 2002
- Failure behavior of an epoxy matrix under different kinds of static loadingComposites Science and Technology, 2001
- State-of-the-art of polymer tribologyTribology International, 1998
- Composites as friction materials: Recent developments in non‐asbestos fiber reinforced friction materials—a reviewPolymer Composites, 1997
- Failure mechanisms in toughened epoxy resins—A reviewComposites Science and Technology, 1988