Experimental determination of detonation properties and reaction zone parameters for an LLM-105-based plastic-bonded explosive
Open Access
- 1 September 2026
- journal article
- Published by AIP Publishing in AIP Advances
- Vol. 16 (9)
Abstract
Experimental investigations of detonation characteristics were conducted for a plastic bonded explosive PBX-22 based on LLM-105 (comprising 95% LLM-105% and 5% binder by weight). An interfacial particle velocity experiment was performed to measure the reaction zone parameters of PBX-22, including the Chapman–Jouguet pressure and reaction zone width. Cylinder expansion tests were carried out to determine the detonation velocity and acceleration ability of PBX-22. The results indicate that compared with the TATB-based insensitive explosive, PBX-22 achieves a ∼3.7% higher detonation velocity (7945 m/s) and a ∼7.8% lower detonation pressure (27.03 GPa), and its detonation pressure is comparable with that of the DAAF-based insensitive explosive. In addition, the parameters of the Jones–Wilkins–Lee equation of state for the detonation products were determined through hydrodynamic simulations.Keywords
Funding Information
- National Natural Science Foundation of China (12502429)
- National Natural Science Foundation of China (12302447)
- National Natural Science Foundation of China (12372343)
- China Academy of Engineering Physics (Y22202520)
- National Key Laboratory of Shockwave and Detonation Physics (S10202520)
- National Key Laboratory of Shockwave and Detonation Physics (JCKYS2024212106)
This publication has 17 references indexed in Scilit:
- Detonation Characteristics of an Aluminized DNAN‐Based Melt‐Cast ExplosivePropellants, Explosives, Pyrotechnics, 2022
- Evaluation of the Detonation Characteristics of Aluminized DNAN‐Based Melt‐Cast Explosive by the Detonation Cylinder TestPropellants, Explosives, Pyrotechnics, 2022
- Detonation performance experiments and modeling for the DAAF-based high explosive PBX 9701Combustion and Flame, 2021
- Chemical reaction zone and electrical conductivity profile in detonating high explosivesCombustion and Flame, 2019
- Detonation Characteristics of an Aluminized Explosive Added with Boron and Magnesium HydridePropellants, Explosives, Pyrotechnics, 2019
- Upgraded Analytical Model of the Cylinder TestPropellants, Explosives, Pyrotechnics, 2013
- Preparation and Properties of An Insensitive Booster Explosive Based on LLM‐105Propellants, Explosives, Pyrotechnics, 2012
- The Role of Aluminum in the Detonation and Post‐Detonation Expansion of Selected Cast HMX‐Based ExplosivesPropellants, Explosives, Pyrotechnics, 2012
- Studies of Detonation Characteristics of Aluminum Enriched RDX CompositionsPropellants, Explosives, Pyrotechnics, 2007
- Determination of Fume State Parameters from Expansion Measurements of Metal TubesPropellants, Explosives, Pyrotechnics, 1986