Effect of clay on immiscible morphology of poly(butylene terephthalate)/polyethylene blend nanocomposites
Authors:
- 29 August 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 102 (4) , 3628-3633
Abstract
Polymer blend nanocomposites containing poly(butylene terephthalate) (PBT), polyethylene (PE), and organoclay were prepared by direct melt compounding. Their immiscible morphologies weree investigated using electronmicroscopy, X‐ray diffraction, and parallel plate rheometry. The PE domain sizes were reduced when the polar PBT phase was continuous (PBT/PE = 60/40) because the clay tactoids effectively prevented the coalescence of the dispersed PE domains. However, when the PBT component presented domains dispersed in the rich PE matrix (PBT/PE = 40/60), the addition of clay (>2 wt %) changed the phase morphology into a novel cocontinuous one, which was further confirmed by rheological measurements. The existence of clay tactoids led to a sharp enhancement in the viscosity of the PBT phase, changing the viscosity ratio between the PBT and PE phases remarkably, which may have promoted the phase inversion. As a result, clay had significant effects on the morphology of the polymer blend. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 3628–3633, 2006Keywords
This publication has 22 references indexed in Scilit:
- Effect of blending sequence on the morphologies of poly(butylene terephthalate)/epoxy/clay nanocomposites by a rheological approachJournal of Applied Polymer Science, 2005
- Effect of flocculated structure on rheology of poly(butylene terephthalate)/clay nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2005
- Co‐continuous Polyamide 6 (PA6)/Acrylonitrile‐Butadiene‐Styrene (ABS) NanocompositesMacromolecular Rapid Communications, 2005
- Influence of Addition of Organoclays on Morphologies in Nylon 6/LLDPE BlendsMacromolecular Chemistry and Physics, 2005
- Atomic force microscopy study on blend morphology and clay dispersion in polyamide‐6/polypropylene/organoclay systemsJournal of Polymer Science Part B: Polymer Physics, 2005
- Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocompositesPolymer, 2004
- Melt processing of PA‐66/clay, HDPE/clay and HDPE/PA‐66/clay nanocompositesPolymer Engineering & Science, 2004
- Study on rheological behavior of polypropylene/clay nanocompositesJournal of Applied Polymer Science, 2003
- Study on kinetics of polymer melt intercalation by a rheological approachJournal of Applied Polymer Science, 2003
- Structure and Dynamics of Polymer-Layered Silicate NanocompositesChemistry of Materials, 1996