Abstract
Spinel cathode material was prepared via a sol‐gel method. Unlike typical spinels that have been reported so far, our spinel material showed no capacity fading in the 3 V range and delivered a reversible capacity of 137∼139 mAh/g in the voltage range of 2.4–3.4 V at a current density of , which corresponds to 93∼94% of the theoretical capacity of . Even better performance was observed at 54°C. In the 4 V range, on the other hand, the material exhibited the charge/discharge characteristics typical of undoped, stoichiometric spinel and the discharge capacity decreased by ca. 10% of the initial capacity (103∼108 mAh/g) after 40 cycles. However, when cycled over the entire voltage range, including both the 3 and 4 V plateaus, the capacity loss in the 4 V range was smaller than when cycled only in the 4 V range. The electrochemical characteristics of the spinel material and the origin of the capacity fading are discussed. © 2000 The Electrochemical Society. All rights reserved.