Magnetization State Selection Method for Uncontrolled Generator Fault Prevention on Variable Flux Memory Machines
- 4 May 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (12) , 13270-13280
Abstract
Permanent magnet (PM) machine drive system is vulnerable to uncontrolled generator fault (UCGF) when all gating signals are removed from inverter during high speed operation. Due to the PM flux controllability of variable flux memory machine (VFMM), this paper proposes a novel magnetization state selection (MSS) method, which can not only extend the machine speed range effectively but also avoid the overvoltage issue during UCGF process. In the proposed MSS method, the VFMM operates at several different magnetization states (MSs) to reduce the MS changing frequency. The critical speed of each MS is determined by a steady-state UCGF model to restrict the maximum voltage within a safety margin. Consequently, the overvoltage issue of the VFMM can be eliminated during the entire UCGF process. On the other side, the proposed scheme can also realize highly efficient flux weakening for speed range extension with a reduced requirement of d-axis current excitation. Finally, the developed control strategy is verified by experimental measurements on a VFMM prototype.Keywords
Funding Information
- National Natural Science Foundation of China (51707036)
- Natural Science Foundation of Jiangsu Province (BK20170674)
- Fundamental Research Funds for the Central Universities (2242017K41003)
- Hong Kong Scholar (XJ2018014)
- Southeast University
- Scientific Research Foundation of Graduate School of Southeast University (YBPY1935)
- Postdoctoral Research Funds (1116000266)
- Southeast University
This publication has 26 references indexed in Scilit:
- Analysis of Magnetizing Trajectories for Variable Flux PM Synchronous Machines Considering Voltage, High-Speed Capability, Torque Ripple, and Time DurationIEEE Transactions on Industry Applications, 2016
- Efficiency Contours and Loss Minimization Over a Driving Cycle of a Variable Flux-Intensifying MachineIEEE Transactions on Industry Applications, 2015
- Operating within dynamic voltage limits during magnetization state increases in variable flux PM synchronous machines2014
- Variable-Flux Machine Torque Estimation and Pulsating Torque Mitigation During Magnetization State ManipulationIEEE Transactions on Industry Applications, 2014
- New fault-tolerant flux-mnemonic doubly-salient permanent-magnet motor driveIET Electric Power Applications, 2011
- Fault-tolerant permanent magnet machines: a reviewIET Electric Power Applications, 2011
- Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell VehiclesProceedings of the IEEE, 2007
- Uncontrolled Generation in Interior Permanent-Magnet MachinesIEEE Transactions on Industry Applications, 2005
- Memory MotorsIEEE Industry Applications Magazine, 2003
- Uncontrolled generator operation of interior PM synchronous machines following high-speed inverter shutdownIEEE Transactions on Industry Applications, 1999