When reinforcing a structure with long carbon fibers continuously injected by a 3D printer, the fiber bundle may be twisted at the fiber bends. In this study, the effects of the fiber bending area on the vibration properties of CFRTP rectangular plates, in which the fiber bends account for a relatively large proportion, are investigated experimentally and FEM analytically. In the middle of the rectangular plate is the fiber bending area. As a result, it is found that the rate of increase of the natural frequencies with respect to the bending fiber area ratio decreases to about 60% in the bending mode and to about 65% in the torsional mode. The trend of natural frequency variation in the bending vibration mode is found to be different depending on the boundary conditions. There is no effect of boundary conditions on the torsional mode.