Application of FWD data in developing dynamic modulus master curves of in-service asphalt layers
Open Access
- 24 May 2017
- journal article
- Published by Vilnius Gediminas Technical University in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
- Vol. 23 (5) , 661-671
Abstract
This paper presents a simple method to determine dynamic modulus master curve of asphalt layers by conducting Falling Weight Deflectometer (FWD) for use in mechanistic-empirical rehabilitation. Ten new and rehabilitated in-service asphalt pavements with different physical characteristics were selected in Khuzestan and Kerman provinces in south of Iran. FWD testing was conducted on these pavements and core samples were taken. Witczak prediction model was used to predict dynamic modulus master curves from mix volumetric properties as well as the bitumen viscosity characteristics. Adjustments were made using FWD results and the in-situ dynamic modulus master curves were obtained. In order to evaluate the efficiency of the proposed method, the results were compared with those obtained by using the developed procedure of the state-of-the-practice, Mechanistic-Empirical Pavement Design Guide (MEPDG). Results showed the proposed method has several advantages over MEPDG including: (1) simplicity in directly constructing in-situ dynamic modulus master curve; (2) developing in-situ master curve in the same trend with the main predicted one; (3) covering the large differences between in-situ and predicted master curve in high frequencies; and (4) the value obtained for the in-situ dynamic modulus is the same as the value measured by the FWD for a corresponding frequency.Keywords
This publication has 26 references indexed in Scilit:
- Monitoring the Mechanical and Structural Behavior of the Pavement Structure Using Electronic SensorsComputer-Aided Civil and Infrastructure Engineering, 2015
- Investigation of Different Methods for Obtaining Asphalt Mixture Creep Compliance for Use in Pavement Mechanistic–Empirical Design SoftwareTransportation Research Record: Journal of the Transportation Research Board, 2015
- In Situ Assessment of Pavement Subgrade Using Falling Weight DeflectometerJournal of Testing and Evaluation, 2015
- Calibration of Pavement ME Design and Mechanistic-Empirical Pavement Design Guide Performance Prediction Models for Iowa Pavement SystemsJournal of Transportation Engineering, 2014
- Knowledge discovery and data mining in pavement inverse analysisTransport, 2013
- Local Calibration and Implementation of the Mechanistic-Empirical Pavement Design Guide for Flexible Pavement DesignJournal of Transportation Engineering, 2012
- Development of Korean Pavement Design Guide for Asphalt Pavements Based on the Mechanistic-Empirical Design PrincipleThe Baltic Journal of Road and Bridge Engineering, 2011
- Backcalculation of Dynamic Modulus Mastercurve from Falling Weight Deflectometer Surface DeflectionsTransportation Research Record: Journal of the Transportation Research Board, 2011
- EVALUATION OF PFWD AS POTENTIAL QUALITY CONTROL TOOL OF PAVEMENT LAYERSJOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2010
- Practical Methodology of Determining the In Situ Dynamic (Complex) Moduli for Engineering AnalysisJournal of Materials in Civil Engineering, 2007