Numerical Study of the Effect of River-Sea Ship Hull Form Parameters on Resistance and Their Optimisation Using the Taguchi-Grey Method
Open Access
- 1 June 2025
- journal article
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (2) , 17-28
Abstract
In this paper, we systematically investigate the effect of the five most important ship hull form parameters, namely the longitudinal centre of buoyancy (LCB), the half angle of entrance of the design waterline ((½))αE), and the length (CLPR), cross-section (CABT) and volume (C∇ PR) parameters for the bulbous bow on the ship resistance using a computational fluid dynamics method. The parent ship hull form investigated in this study is a 4600DWT cargo ship, which operates on Vietnam’s river-sea routes. To save time and reduce costs, only 25 test cases designed with the orthogonal array Taguchi method are simulated, and the resistance is calculated in deep and shallow water at speeds of 10.0 and 9.0 knots, respectively. The optimal combination of the five ship hull form parameters is obtained using Taguchi-grey relational analysis. The results indicate that the optimum ship hull form depends on the water depth, and that LCB is the most critical parameter in regard to resistance. Of the combinations studied here, the variant with (½)αE=42°, CLPR=0.0141, CABT=0.1600, C∇ PR=0.00173, LCB=48.654%LBP is found to be optimal.Keywords
This publication has 22 references indexed in Scilit:
- Optimization of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applicationsEnergy Conversion and Management, 2022
- Parametric optimization to improve the machining process by using Taguchi method: A reviewMaterials Today: Proceedings, 2021
- Introduction to the Taguchi Method2018
- Ship Resistance and Propulsion2017
- Optimization of a two degrees of freedom compliant mechanism using Taguchi method-based grey relational analysisMicrosystem Technologies, 2017
- Application of Taguchi-grey multi responses optimization on process parameters in electro erosionMeasurement, 2014
- A Taguchi approach for optimization of design parameters in a tube with coiled wire insertsApplied Thermal Engineering, 2011
- The Taguchi methodWIREs Computational Statistics, 2011
- Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2007
- TAGUCHI-AIDED SEARCH METHOD FOR DESIGN OPTIMIZATION OF ENGINEERING SYSTEMSEngineering Optimization, 1998