A tunable combline bandpass filter using barium strontium titanate interdigital varactors on an alumina substrate
Authors:
- P.D. FranzonPFP.D. Franzon
- D. GhoshDGD. Ghosh
- J.-P. MariaJMJ.-P. Maria
- M.B. SteerMSM.B. Steer
- 1 January 2005
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 595-598
Abstract
Barium strontium titanate (BST) has a field-dependent permittivity that enables it to be used as a dielectric in a voltage-tunable capacitor or varactor. A tunable combline bandpass filter was designed and characterized using BST varactors fabricated on a polycrystalline alumina substrate with copper metallization and is 14 mm /spl times/ 14 mm in size. The center frequency of the filter varies from 1.6 to 2.0 GHz with the application of 200 V tuning voltage. A 25% tuning range was achieved using tuning field strength of 300 kV/cm. The zero bias insertion loss was 6.6 dB and this decreased to 4.3 dB at the high bias state. The return loss was better than 10 dB.Keywords
This publication has 5 references indexed in Scilit:
- Electronically tunable LTCC based multi-layer filter for mobile handset application2003
- Miniature and tunable filters using mems capacitorsIEEE Transactions on Microwave Theory and Techniques, 2003
- Voltage-controlled RF filters employing thin-film barium-strontium-titanate tunable capacitorsIEEE Transactions on Microwave Theory and Techniques, 2003
- CAD models for multilayered substrate interdigital capacitorsIEEE Transactions on Microwave Theory and Techniques, 1996
- Tunable and adaptive bandpass filter using a nonlinear dielectric thin film of SrTiO3Applied Physics Letters, 1996