InGaSb-on-insulator p-channel metal-oxide-semiconductor field-effect transistors on Si fabricated by direct wafer bonding
Authors:
- 18 March 2019
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (11) , 114501
Abstract
InGaSb-on-insulator (InGaSb-OI) and InAs/InGaAs/InAs-on-insulator (InAs/InGaAs-OI) structures have been realized on Si by a direct wafer bonding (DWB) technology using atomic-layer-deposition Al2O3. While strain introduced in InGaSb channel layers grown on InAs can enhance the hole mobility of the Sb-based channel layers, a difficult issue of fabricating InGaSb-OI wafers is to obtain a smooth InGaSb surface, which is mandatory for wafer bonding. In this study, the surface of a 20-nm-thick In0.185Ga0.815Sb channel grown on an InAs (100) substrate and an InAs (2.5 nm)/In0.185Ga0.815Sb (20 nm)/InAs (2.5 nm) channel with a 20-nm-thick GaSb buffer layer grown on an InAs (100) substrate by metal-organic chemical vapor deposition have a root mean square of the surface roughness as low as 0.16 and 0.22 nm, respectively, over a scan area of 10 × 10 μm2, which are smooth enough to employ the wafer bonding. As a result, the fabrication of the InGaSb-OI wafers by the DWB and the operation of InGaSb-OI p-channel metal-oxide-semiconductor field-effect transistors (p-MOSFETs) by using the DWB wafers are demonstrated. Also, the performance of InGaSb-OI p-MOSFETs is found to be improved by inserting ultrathin InAs layers between InGaSb and insulating buried oxide layers. An InGaSb-OI and an InAs/InGaAs-OI p-MOSFET under the accumulation-mode operation exhibit a peak mobility of ∼161 and ∼273 cm2/V s, respectively. The channel hole mobility of the InGaSb-OI p-MOSFET is higher than that of the GaSb-on-insulator (GaSb-OI) p-MOSFET and can exceed that of Si p-MOSFETs.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization
This publication has 22 references indexed in Scilit:
- Self-aligned Ni-GaSb source/drain junctions for GaSb p-channel metal-oxide-semiconductor field-effect transistorsApplied Physics Letters, 2014
- Characterization of Ni–GaSb Alloys Formed by Direct Reaction of Ni with GaSbApplied Physics Express, 2012
- Nanoscale InGaSb Heterostructure Membranes on Si Substrates for High Hole Mobility TransistorsNano Letters, 2012
- High-Frequency Performance of Self-Aligned Gate-Last Surface Channel $\hbox{In}_{0.53}\hbox{Ga}_{0.47}\hbox{As}$ MOSFETIEEE Electron Device Letters, 2012
- Nanometre-scale electronics with III–V compound semiconductorsNature, 2011
- Sub-10-nm Extremely Thin Body InGaAs-on-Insulator MOSFETs on Si Wafers With Ultrathin $\hbox{Al}_{2}\hbox{O}_{3}$ Buried Oxide LayersIEEE Electron Device Letters, 2011
- GaSb Inversion-Mode PMOSFETs With Atomic-Layer-Deposited $\hbox{Al}_{2}\hbox{O}_{3}$ as Gate DielectricIEEE Electron Device Letters, 2011
- Self-Aligned Metal Source/Drain InxGa1-xAs n-Metal–Oxide–Semiconductor Field-Effect Transistors Using Ni–InGaAs AlloyApplied Physics Express, 2011
- Thin Body III–V-Semiconductor-on-Insulator Metal–Oxide–Semiconductor Field-Effect Transistors on Si Fabricated Using Direct Wafer BondingApplied Physics Express, 2009
- On the universality of inversion layer mobility in Si MOSFET's: Part I-effects of substrate impurity concentrationIEEE Transactions on Electron Devices, 1994