Deformation Behavior and Properties of 7075 Aluminum Alloy under Electromagnetic Hot Forming
Open Access
Abstract
High-strength 7075 aluminum alloy is widely used in the aerospace industry. The forming performance of 7075 aluminum alloy is poor at room temperature. Therefore, hot forming is mainly adopted. Electromagnetic forming is a high-speed forming technology that can significantly improve the forming limit of difficult-to-deform materials. However, there are few studies on electromagnetic hot forming of 7075-T6 aluminum alloy. In this study, the deformation behavior of 7075-T6 aluminum alloy in the temperature range of 25 °C to 400 °C was investigated. As the temperature increased, the sheet forming height first decreased, then increased. When the forming temperature is between 200 °C and 300 °C, η phase coarsening leads to a decrease in stress and hardness of the material. When the forming temperature is between 300 °C and 400 °C, continuous dynamic recrystallization of 7075 aluminum alloy occurs, resulting in grain refinement and an increase in stress and hardness. The results of numerical simulations and experiments all show that the forming height and deformation uniformity of the sheet metal are optimal at 400 °C, compared to 200 °C.Keywords
Funding Information
- National Natural Science Foundation of China (51775563)
This publication has 30 references indexed in Scilit:
- Warm formability and post-forming microstructure/property of high-strength AA 7075-T6 Al alloyMaterials Science and Engineering: A, 2016
- Effect of an aluminum driver sheet on the electromagnetic forming of DP780 steel sheetJournal of Materials Processing Technology, 2016
- Geometric issues in V-bending electromagnetic forming process of 2024-T3 aluminum alloyJournal of Manufacturing Processes, 2015
- Investigations on warm forming of AW-7020-T6 alloy sheetJournal of Materials Processing Technology, 2014
- Electromagnetic incremental forming (EMIF): A novel aluminum alloy sheet and tube forming technologyJournal of Materials Processing Technology, 2014
- Shape calibration of high strength metal sheets by electromagnetic formingJournal of Manufacturing Processes, 2013
- Electromagnetic forming—A reviewJournal of Materials Processing Technology, 2011
- Formability and failure mechanisms of AA2024 under hot forming conditionsMaterials Science and Engineering: A, 2011
- Springback Calibration Using Pulsed Electromagnetic FieldAIP Conference Proceedings, 2005
- A model of continuous dynamic recrystallizationActa Materialia, 2003