Novel batch reactor design for the adsorption of arsenate on chitosan
Authors:
- 9 November 2010
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 85 (12) , 1561-1568
Abstract
BACKGROUND: The sorption of arsenate, a poison of acute toxicity found in natural waters, onto chitosan, a biosorbent derived from waste seafood shells has been studied. A batch adsorber design model was developed to determine how much chitosan adsorbent is required to reduce the arsenate concentration in solutions to the WHO standard of 10 µg L−1.RESULTS: A series of batch kinetic experiments has been carried out at different initial pH values. The initial arsenate sorption appears to be completed after 30 min, however, a steady reversible reaction takes place resulting in the desorption of arsenate over 48 h. These phenomena in the batch kinetic data have been correlated simultaneously using the newly developed pseudo‐first order reversible model. Two batch reactor design models have been developed and compared. The first model is a conventional approach based on the equilibrium isotherm capacity equation. A second batch adsorption reactor design is based on the principle of contacting time required, tmax, for the chitosan to achieve its maximum adsorption capacity, qmax. The practical outcome from the second batch adsorber model results in a saving in adsorbent mass per batch of approximately 39.4%, 96.2% and 92.3% chitosan adsorbent at pH conditions of 3.5, 4.0 and 5.0, respectively.CONCLUSION: The adsorbent cost and handling costs are reduced in the second batch adsorber model. There is also a significant savings in the batch turnaround time required in the batch adsorber design when the design is based on the maximum adsorption capacity rather than the equilibrium adsorption capacity. Copyright © 2010 Society of Chemical IndustryKeywords
This publication has 36 references indexed in Scilit:
- Contamination by arsenic and other trace elements in tube-well water and its risk assessment to humans in Hanoi, VietnamEnvironmental Pollution, 2006
- Dynamical coupling of PBPK/PD and AUC-based toxicity models for arsenic in tilapia Oreochromis mossambicus from blackfoot disease area in TaiwanEnvironmental Pollution, 2005
- Equilibrium studies for the sorption of lead from effluents using chitosanChemosphere, 2003
- Arsenic poisoning of Bangladesh groundwaterNature, 1998
- An assessment of the developmental toxicity of inorganic arsenicReproductive Toxicology, 1998
- Factors influencing metal bioavailability in soils: preliminary investigations for the development of a critical loads approach for metalsChemical Speciation & Bioavailability, 1998
- Arsenic removal by ferric chlorideJournal AWWA, 1996
- Arsenic occurrence: USEPA seeks clearer pictureJournal AWWA, 1994
- A study of ground water contamination by arsenic in the residential area of behala, calcutta due to industrial pollutionEnvironmental Pollution, 1993
- The quantities of cadmium, lead, mercury and arsenic entering the U.K. environment from human activitiesScience of The Total Environment, 1986