Development of Multi-Principal Element Alloys W19.8Mo19.8Nb19.8Ti19.8Cr19.8Al1 (At. %) Through Mechanical Alloying Process
Open Access
- 1 January 2024
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 27, e20230547
Abstract
Refractory multi-principal element alloys constitute a novel category of metallic materials, and they have good properties, particularly at elevated temperatures. Currently, casting and powder metallurgy stand as the two predominant manufacturing routes. This study focuses on the production of the W19.8Mo19.8Nb19.8Ti19.8Cr19.8Al1 (At. %) alloy via the mechanical alloying process. Analyses of morphology and particle size distribution at intervals of 12, 24, 36, and 48 hours of milling showed a gradual decrease in particle size according to increase in milling time. The XRD showed the presence of the BCC phase after 48 hours of milling, and the application of the Williamson-Hall methods indicated that after 12, 24, and 36 hours of milling, the crystallite size decreased and the microstrain increased gradually. However, after 48 hours of milling, there was an increase in these values, suggesting the reordering of the structure of this alloy. In addition, Fe contamination increases significantly for higher milling time.Keywords
This publication has 38 references indexed in Scilit:
- Processing and characterization of TiNbMoTaW refractory high entropy alloy by mechanical alloyingAdvanced Powder Technology, 2023
- A high entropy alloy of AlCrFeNiTiZn synthesized through mechanical alloying and sinteringIntermetallics, 2023
- Preparation of TiZrNbTa refractory high-entropy alloy powder by mechanical alloying with liquid process control agentsIntermetallics, 2020
- Effects of Cr Content on Microstructure and Mechanical Properties of WMoNbTiCr High-Entropy AlloysJournal of Materials Engineering and Performance, 2020
- Optimisation of high energy ball milling parameters to synthesize oxide dispersion strengthened Alloy 617 powder and its characterizationAdvanced Powder Technology, 2019
- Solid-solution strengthening in refractory high entropy alloysActa Materialia, 2019
- From high-entropy alloys to complex concentrated alloysComptes Rendus. Physique, 2018
- Amorphization and nanocrystalline Nb3Al intermetallic formation during mechanical alloying and subsequent annealingAdvanced Powder Technology, 2017
- A critical review of high entropy alloys and related conceptsActa Materialia, 2017
- Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloysIntermetallics, 2011