Analysis of Mechanical Properties and Energy Evolution of Through-Double-Joint Sandy Slate Under Three-Axis Loading and Unloading Conditions
Open Access
- 30 August 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9570
Abstract
In the mining of deep mineral resources and tunnel engineering, the degradation of mechanical properties and the evolution of energy of through-double-joint sandy slate under triaxial loading and unloading conditions are key scientific issues affecting the stability design of the project. The existing research has insufficiently explored the joint inclination angle effect, damage evolution mechanism, and energy distribution characteristics of this type of rock mass under the path of increasing axial pressure and removing confining pressure. Based on this, in this study, uniaxial compression, conventional triaxial compression and increasing axial pressure, and removing confining pressure tests were conducted on four types of rock-like materials with prefabricated 0°, 30°, 60°, and 90° through-double-joint inclinations under different confining pressures. The axial stress/strain curve, failure characteristics, and energy evolution law were comprehensively analyzed, and damage variables based on dissipated energy were proposed. The test results show that the joint inclination angle significantly affects the bearing capacity of the specimen, and the peak strength shows a trend of first increasing and then decreasing with the increase in the inclination angle. In terms of failure modes, the specimens under conventional triaxial compression exhibit progressive compression/shear failure (accompanied by rock bridge fracture zones), while under increased axial compression and relief of confining pressure, a combined tensioning and shear failure is induced. Moreover, brittleness is more pronounced under high confining pressure, and the joint inclination angle also has a significant control effect on the failure path. In terms of energy, under the same confining pressure, as the joint inclination angle increases, the dissipated energy and total energy of the cemented filling body at the end of triaxial compression first decrease and then increase. The triaxial compression damage constitutive model of jointed rock mass established based on dissipated energy can divide the damage evolution into three stages: initial damage, damage development, and accelerated damage growth. Verified by experimental data, this model can well describe the damage evolution characteristics of rock masses with different joint inclination angles. Moreover, an increase in the joint inclination angle will lead to varying degrees of damage during the loading process of the rock mass. The research results can provide key theoretical support and design basis for the stability assessment of surrounding rock in deep and high-stress plateau tunnels, the optimization of support parameters for jointed rock masses, and early warning of rockburst disasters.Keywords
Funding Information
- Chuanxin Rong Fund Project: The National Natural Science Foundation of China (51878005, 2024cx2023)
- Yang Wang Fund Project: Anhui University of Science and Technology Graduate Innovation (51878005, 2024cx2023)
This publication has 45 references indexed in Scilit:
- Mechanical manifestation characteristics and damage evolution law of unloading perturbation damage in surrounding rock of deep roadwaysGeomechanics and Geophysics for Geo-Energy and Geo-Resources, 2025
- Mechanical behaviour and macro-micro failure mechanisms of frozen weakly cemented sandstone under different stress pathsConstruction and Building Materials, 2024
- Three-dimensional discrete element simulation on mechanical response and failure characteristics of composite rock under triaxial unloading conditionComputers and Geotechnics, 2024
- Study on failure mechanical behavior of coal in triaxial stress loading and unloading pathBulletin of Engineering Geology and the Environment, 2023
- Mechanical behavior and tension-shear failure mechanism of fractured rock mass under uniaxial conditionBulletin of Engineering Geology and the Environment, 2023
- Study on damage anisotropy and energy evolution mechanism of jointed rock mass based on energy dissipation theoryBulletin of Engineering Geology and the Environment, 2023
- Reliability Evaluation and Prediction of Deep Buried Tunnel Based on Similarity Theory and Model TestKSCE Journal of Civil Engineering, 2023
- Excavation Stress Path Induced Fracturing Mechanism of Hard Rock in Deep TunnelRock Mechanics and Rock Engineering, 2022
- On the selection of joint constitutive models for geomechanics simulation of fractured rocksComputers and Geotechnics, 2022
- Energy evolution analysis and failure criteria for rock under different stress pathsActa Geotechnica, 2020