Flow around a Complex Building: Comparisons between Experiments and a Reynolds-Averaged Navier–Stokes Approach
Authors:
- 1 May 2004
- journal article
- Published by American Meteorological Society in Journal of Applied Meteorology and Climatology
- Vol. 43 (5) , 696-710
Abstract
An experiment investigating flow around a single complex building was performed in 2000. Sonic anemometers were placed around the building, and two-dimensional wind velocities were recorded. An energy-budget and wind-measuring station was located upstream to provide stability and inflow conditions. In general, the sonic anemometers were located in a horizontal plane around the building at a height of 2.6 m above the ground. However, at the upwind wind station, two levels of the wind were measured. The resulting database can be sampled to produce mean wind fields associated with specific wind directions such as 210°, 225°, and 240°. The data are available generally and should be useful for testing computational fluid dynamical models for flow around a building. An in-house Reynolds-averaged Navier–Stokes approach was used to compare with the mean wind fields for the predominant wind directions. The numerical model assumed neutral flow and included effects from a complex array of trees in the vicinity of the building. Two kinds of comparisons are presented: 1) direct experimental versus modeled vector comparisons and 2) a numerical metric approach that focuses on wind magnitude and direction errors. The numerical evaluation generally corroborates the vector-to-vector inspection, showing reasonable agreement for the mean wind fields around the building. However, regions with special challenges for the model were identified. In particular, recirculation regions were especially difficult for the model to capture correctly. In the 240° case, there is a tendency for the model to exaggerate the turning effect in the wind caused by the effect of the building. Two different kinds of simulations were performed: 1) predictive calculations with a reasonable but not high-fidelity representation of the building's architectural complexity and 2) postexperiment calculations in which a large number of architectural features were well represented. Although qualitative evidence from inspection of the angles of the vectors in key areas such as around the southeast corner of the building indicated an improvement from the higher-fidelity representation of the building, the general numerical evaluation indicated little difference in the quality of the two solutions.Keywords
This publication has 14 references indexed in Scilit:
- The dispersion of fugitive emissions from storage tanksJournal of Wind Engineering and Industrial Aerodynamics, 2002
- Numerical and experimental modelling of pollutant dispersion in a street canyonJournal of Wind Engineering and Industrial Aerodynamics, 2002
- Flow around three-dimensional obstacles in boundary layersJournal of Wind Engineering and Industrial Aerodynamics, 2002
- Simulations of flow around a cubical building: comparison with towing-tank data and assessment of radiatively induced thermal effectsAtmospheric Environment, 2001
- Projection 2 Goes Turbulent - and Fully ImplicitInternational Journal of Computational Fluid Dynamics, 1998
- Flow and dispersion around an isolated buildingAtmospheric Environment, 1996
- A comparison of numerical and physical modeling of stable atmospheric flow and dispersion around a cubical buildingAtmospheric Environment, 1996
- Numerical modeling of three-dimensional flow and pollutant dispersion around structuresEnvironmental Software, 1994
- FEM3 model simulations of selected thorney island phase I trialsJournal of Hazardous Materials, 1987
- A Numerical Model Study of Turbulent Airflow in and Above a Forest CanopyJournal of the Meteorological Society of Japan, 1982