Simulation Method for Current-Limiting Effect of Saturated-Core Superconducting Fault Current Limiter
Authors:
- 1 March 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 26 (4) , 1-4
Abstract
The saturated-core superconducting fault current limiter (SCSFCL) is an important new device for limiting fault current in power grids. As the loss of its core and tank can reach up to a few hundred kilowatts and influence both the transitional process and the steady limiting state, the method for simulating its current-limiting effect considering the loss needs to be tackled. In this paper, a field-circuit coupled simulation method for computing the current-limiting effect of the SCSFCL is presented. The SCSFCL is simulated in detail by the finite-element model, which can reflect both its magnetic and loss properties. The SCSFCL is excited by a voltage source in series with inner impedance, which is the simplified circuit of the power grid. The approach of getting this simplified power grid is given. Moreover, approaches of achieving high simulation accuracy and efficiency are also given. One is the varying simulation time-step approach based on the characteristics of the voltage waveform. The other is setting a proper beginning phase of the voltage source to decrease the transitional period and increase the simulation efficiency. Finally, the structure of an SCSFCL in a 220-kV power grid is given, and its current-limiting effects under a 50-kA fault current in the cases of withdrawing and keeping the dc bias are compared, showing that the former case is of a little bit higher current-limiting effect.Keywords
Funding Information
- National High-tech R&D Program of China (2014AA032705)
This publication has 8 references indexed in Scilit:
- Electromagnetic Transient Analysis of the Saturated Iron-Core Superconductor Fault Current LimiterIEEE Transactions on Applied Superconductivity, 2014
- A Methodology for Modeling and Simulation of Saturated Cores Fault Current LimitersIEEE Transactions on Applied Superconductivity, 2014
- Dynamic Inductance in Saturated Cores Fault Current LimitersJournal of Superconductivity and Novel Magnetism, 2014
- Experimental Analysis of the Magnetic Flux Characteristics of Saturated Core Fault Current LimitersIEEE Transactions on Magnetics, 2012
- Development and Deployment of Saturated-Core Fault Current Limiters in Distribution and Transmission SubstationsIEEE Transactions on Applied Superconductivity, 2011
- Three-Dimensional Pareto-Optimal Design of Inductive Superconducting Fault Current LimitersIEEE Transactions on Applied Superconductivity, 2010
- Development of a 13.2 kV/630 A (8.3 MVA) High Temperature Superconducting Fault Current LimiterIEEE Transactions on Applied Superconductivity, 2008
- System Studies of the Superconducting Fault Current Limiter in Electrical Distribution GridsIEEE Transactions on Applied Superconductivity, 2007