Rapid Prototyping of Efficient Electromagnetic Interference Shielding Polymer Composites via Fused Deposition Modeling
Open Access
- 22 December 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (1) , 37
Abstract
Acrylonitrile–butadiene–styrene (ABS) filled with 6 wt.% of multi-walled carbon nanotubes and graphene nanoplatelets was extruded in filaments and additively manufactured via fused deposition modeling (FDM). The electrical conductivity and electromagnetic interference shielding efficiency (EMI SE) in the frequency range between 8.2 and 12.4 GHz of the resulting 3D samples were assessed. For comparison purposes, compression molded samples of the same composition were investigated. Electrical conductivity of about 10−4 S·cm−1 and attenuations of the incident EM wave near 99.9% were achieved for the 3D components loaded with multi-walled carbon nanotubes, almost similar to the correspondent compression molded samples. Transmission electron microscopy (TEM) images of ABS composite filaments show that graphene nanoplatelets were oriented along the polymer flow whereas multi-walled carbon nanotubes were randomly distributed after the extrusion process. The electrical conductivity and electromagnetic interference (EMI) shielding properties of compression molded and FDM manufactured samples were compared and discussed in terms of type of fillers and processing parameters adopted in the FDM process, such as building directions and printing patterns. In view of the experimental findings, the role of the FDM processing parameters were found to play a major role in the development of components with enhanced EMI shielding efficiency.Keywords
This publication has 34 references indexed in Scilit:
- Graphite reinforced polyvinylidene fluoride composites an efficient and sustainable solution for electromagnetic pollutionComposites Part B: Engineering, 2017
- Phosphonium–based ionic liquid as dispersing agent for MWCNT in melt-mixing polystyrene blends: Rheology, electrical properties and EMI shielding effectivenessMaterials Chemistry and Physics, 2017
- High frequency millimetre wave absorbers derived from polymeric nanocompositesPolymer, 2016
- Tailoring the dispersion of multiwall carbon nanotubes in co-continuous PVDF/ABS blends to design materials with enhanced electromagnetic interference shieldingJournal of Materials Chemistry A, 2015
- Conductive polymer composites with segregated structuresProgress in Polymer Science, 2014
- Electromagnetic interference shielding properties of butyl rubber-single walled carbon nanotube compositesComposites Science and Technology, 2014
- Polymer/carbon based composites as electromagnetic interference (EMI) shielding materialsMaterials Science and Engineering: R: Reports, 2013
- Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacingCarbon, 2012
- Enhanced microwave absorption behavior of polyaniline-CNT/polystyrene blend in 12.4–18.0GHz rangeSynthetic Metals, 2011
- A review of vapor grown carbon nanofiber/polymer conductive compositesCarbon, 2009