Lignin-Based Magnesium Hydroxide Nanocomposite. Synthesis and Application for the Removal of Potentially Toxic Metals from Aqueous Solution
Open Access
- 14 August 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (9) , 5492-5503
Abstract
The pollution of water by potentially toxic metals or so-called heavy metals is the most severe form of environmental impact. Nanocomposites are considered promising materials for the removal of potentially toxic metals from aqueous solution through adsorption or ion exchange. To produce high-performance adsorbent for the removal of Ni2+, Cd2+, and Pb2+, lignin–Mg(OH)2 nanocomposite (LH-MH) was developed utilizing hydrolytic lignin waste with possible regeneration after metal uptake. The LH-MH was prepared using hydrolytic lignin, magnesium chloride, and NaOH solution by a thermally assisted method. The structure was studied using X-ray diffraction, transmission electron microscopy, and scanning electron microscopy, while chemical composition was evaluated by Fourier transform infrared spectroscopy, thermogravimetric analysis/differential thermogravimetry, and energy-dispersive X-ray spectroscopy mapping. Adsorption was described by the Langmuir and Sips models, whereas kinetics was elucidated by pseudo-first-order and pseudo-second-order models. The obtained material demonstrated a nanocomposite structure indicating well-distributed nano-Mg(OH)2 onto the lignin polymer matrix. The nanocomposite demonstrated superior removal of Ni2+, Cd2+, and Pb2+. The mechanism of adsorption was investigated indicating ion exchange between toxic metals and Mg2+. The obtained adsorbent was successfully regenerated using combined treatment by HCl–MgCl2–NaOH.Keywords
This publication has 43 references indexed in Scilit:
- Green thermal-assisted synthesis and characterization of novel cellulose-Mg(OH)2 nanocomposite in PEG/NaOH solventCarbohydrate Polymers, 2017
- Emerging environmental contaminants: Challenges facing our next generation and potential engineering solutionsEnvironmental Technology & Innovation, 2017
- Calcium hydroxyapatite microfibrillated cellulose composite as a potential adsorbent for the removal of Cr(VI) from aqueous solutionChemical Engineering Journal, 2016
- Investigation on the efficiency and mechanism of Cd(II) and Pb(II) removal from aqueous solutions using MgO nanoparticlesJournal of Hazardous Materials, 2015
- Simultaneous removal of Cd(II) and ionic dyes from aqueous solution using magnetic graphene oxide nanocomposite as an adsorbentChemical Engineering Journal, 2013
- Synthesis of an Attapulgite Clay@Carbon Nanocomposite Adsorbent by a Hydrothermal Carbonization Process and Their Application in the Removal of Toxic Metal Ions from WaterLangmuir, 2011
- Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: Kinetic and equilibrium modelingChemical Engineering Journal, 2010
- Enhanced adsorptive removal of fluoride using mesoporous aluminaMicroporous and Mesoporous Materials, 2010
- Selective Removal of Heavy Metals from Industrial Wastewater Using Maghemite Nanoparticle: Performance and MechanismsJournal of Environmental Engineering, 2006
- A Review of Carbon Nanotube Toxicity and Assessment of Potential Occupational and Environmental Health RisksCritical Reviews in Toxicology, 2006