Stress Corrosion Cracking of Inconel 600 in aqueous solutions at elevated temperature part I: Initiation and inhibition of corrosion cracking process
Authors:
- 1 March 1997
- journal article
- Published by Wiley in Materials and Corrosion
- Vol. 48 (3) , 151-156
Abstract
The study reported here has been designed to determine the influencing effect of sulphate ions on chloride induced crack initiation of Inconel 600 using compact tension (CT) samples in chloride containing aqueous solutions at elevated temperature up to 250°. The results show that sulphate ions retard the effect of chloride ions on crack initiation in hot water up to 250°. Intergranular stress corrosion cracking (IGSCC) occurs in both chloride solution and in chloride solution with relatively low concentration of sulphate ions. The mode of cracking changes from brittle to ductile failure due to the influence of inhibiting concentration of sulphate. The results are interpreted in the light of repassivation‐dissolution controlled mechanism which is the predominant mechanism. The inhibiting effect of sulphate ions on the initiation of corrosion cracking is attributed to the repassivation and the formation of Fe‐Cr‐spinel oxide layer which is stable also at higher temperature.Keywords
This publication has 9 references indexed in Scilit:
- Mechanismus der Rißausbreitung bei der Spannungsrißkorrosion des Stahles X 6 CrNiTi 18 10 mit Hilfe elektronenmikroskopischer Untersuchungen / Characterisation of the SCC Crack Growth Mechanism in Type AISI 321 Stainless Steel by Electron Microscopic ExaminationPractical Metallography, 1994
- Mechanismus des Rißwachstums bei der Spannungsrißkorrosion des austenitischen Stahls X6 CrNiTi 18 10 in wäßriger Chloridlösung bei erhöhten TemperaturenMaterials and Corrosion, 1992
- Repassivation Behavior of Nickel-Base Alloys in High Temperature Acidic SolutionMaterials Transactions, JIM, 1992
- Effect of sulphate and chloride ions on the crevice chemistry and stress corrosion cracking of alloy 600 in high temperature aqueous solutionsCorrosion Science, 1992
- A mechanistic study of transgranular stress corrosion cracking of type 304 stainless steelMetallurgical Transactions A, 1991
- Mechanism of brittle fracture in a ductile 316 alloy during stress corrosionActa Metallurgica et Materialia, 1990
- Characterization of oxide structures formed on nickel-chromium alloy during low pressure oxidation at 500?600 COxidation of Metals, 1990
- A mechanism for hydrogen-induced intergranular stress corrosion cracking in alloy 600Metallurgical Transactions A, 1990
- Characterization of Crack Tip Electrochemistry Using a Simulated CrackCorrosion, 1988