A Constitutive Model for Strain-Induced Crystallization in Poly(ethylene terephthalate) (PET) during Finite Strain Load-Hold Simulations
- 29 March 2005
- journal article
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 128 (1) , 28-33
Abstract
Recently, a hyperelastic-viscoplastic constitutive model was developed for PET and the noncrystallizing copolymer PETG (R. B. Dupaix, Ph.D. thesis, MIT, 2003). The materials were found to behave very similarly under monotonic loading conditions and the single constitutive model was able to capture both materials’ behavior. However, differences were observed upon unloading, and it is expected that additional differences would be observed under more complex loading conditions. Here their behavior is investigated under nonmonotonic loading conditions, specifically under load-hold conditions. The model of Dupaix and Boyce (R. B. Dupaix, Ph.D. thesis, MIT, 2003) is modified to include Ahzi’s upper-bound model for strain-induced crystallization [Ahzi et al., Mech. Mater., 35(12), pp. 1139–1148 (2003)]. The crystallization model is adapted to include criteria for the onset of strain-induced crystallization which depend on strain rate and level of deformation. The strain-rate condition prevents crystallization from beginning prior to the deformation process slowing significantly. The level-of-deformation condition delays crystallization until the material has deformed beyond a critical level. The combined model demonstrates differences in behavior between PET and PETG during complex loading situations, indicating its ability to capture the fundamental criteria for the onset of strain-induced crystallization.Keywords
This publication has 16 references indexed in Scilit:
- Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperatureMechanics of Materials, 2003
- Three phase model in drawn thermoplastic polyesters: comparison of differential scanning calorimetry and thermally stimulated depolarisation current experimentsPolymer, 2002
- Real-time FTIR and WAXS studies of drawing behavior of poly(ethylene terephthalate) filmsJournal of Applied Polymer Science, 2001
- Constitutive model for the finite deformation stress–strain behavior of poly(ethylene terephthalate) above the glass transitionPolymer, 2000
- Effect of draw ratio and temperature on the strain-induced crystallization of poly (ethylene terephthalate) at fast draw ratesPolymer, 1999
- Constitutive modeling of the large strain time-dependent behavior of elastomersJournal of the Mechanics and Physics of Solids, 1998
- Thermal behaviour of drawn semicrystalline poly(ethylene terephthalate) filmsJournal of Thermal Analysis and Calorimetry, 1994
- Development of crystalline order during hot-drawing of poly(ethylene terephthalate) film: influence of strain ratePolymer, 1992
- On H. Hencky’s Approximate Strain-Energy Function for Moderate DeformationsJournal of Applied Mechanics, 1979
- Elastic-Plastic Deformation at Finite StrainsJournal of Applied Mechanics, 1969