An adaptive multi-grid chemistry (AMC) model for efficient simulation of HCCI and DI engine combustion
Authors:
- 21 January 2009
- journal article
- research article
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 13 (1) , 83-104
Abstract
There is a need to reduce the computational expense of practical multidimensional combustion simulations. Simulation of Homogeneous Charge Compression Ignition (HCCI) engine processes requires consideration of detailed chemistry in order to capture the ignition and combustion characteristics. Even with relatively coarse numerical meshes and reduced chemistry mechanisms, calculation times are still unacceptably long. For the simulation of Direct Injection (DI) engines, fine meshes are needed to achieve the resolution required by the spray and mixing models, and they are computationally expensive even with reduced chemistry. In addition, the increasing application of CFD for engine design optimization is pushing the demand to reduce computational time. In current design optimizations, depending on the size of the parametric space, hundreds of individual simulations are needed. This work presents an efficient Adaptive Multi-grid Chemistry (AMC) model that can be used in engine CFD codes for simulations of HCCI and DI engines with detailed chemistry. It was found that the number of cells computed with the chemistry solver can be reduced by two orders of magnitude for HCCI engines. The results predicted by the present KIVA AMC code are also consistent with those calculated by the original code using every cell. In the method, progressively coarser grids are used for cells with similar gas properties in the chemistry calculation (up to four neighbour levels) or in the global method, cells are grouped without regard for their locations in the cylinder. Averaged and gradient-preserving remapping techniques used in multi-zone engine simulations were also explored. A parametric study was conducted for determining the model variables, such as the degree of local homogeneity for the multi-grid solvers. The simulation results were compared with experimental data obtained from a Honda engine operated with n-heptane under HCCI conditions for which directly measured in-cylinder temperature and H2O mole fraction data are available. In addition, simulation results were found to agree well with experimental data from a DI diesel engine operated under PCCI conditions with ultra-high EGR rates. It was found that computer time was reduced by a factor of ten for HCCI cases and two to three for DI cases without losing prediction accuracy.Keywords
This publication has 19 references indexed in Scilit:
- Optimization study of the effects of bowl geometry, spray targeting, and swirl ratio for a heavy-duty diesel engine operated at low and high loadInternational Journal of Engine Research, 2008
- NUMERICAL STUDY ON THE LOW EMISSION WINDOW OF HOMOGENEOUS CHARGE COMPRESSION IGNITION DIESEL COMBUSTIONCombustion Science and Technology, 2007
- Validation of engine combustion models against detailed in-cylinder optical diagnostics data for a heavy-duty compression-ignition engineInternational Journal of Engine Research, 2007
- A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition enginesInternational Journal of Engine Research, 2005
- Parametric study of combustion characteristics in a direct-injection diesel homogeneous charge compression ignition engine with a low-pressurefuel injectorInternational Journal of Engine Research, 2005
- Analysis of Premixed Charge Compression Ignition Combustion With a Sequential Fluid Mechanics-Multizone Chemical Kinetics ModelSAE International Journal of Advances and Current Practices in Mobility, 2005
- Effect of Mixing on Hydrocarbon and Carbon Monoxide Emissions Prediction for Isooctane HCCI Engine Combustion Using a Multi-zone Detailed Kinetics SolverSAE International Journal of Advances and Current Practices in Mobility, 2003
- Use of Detailed Chemical Kinetics to Study HCCI Engine Combustion With Consideration of Turbulent Mixing EffectsJournal of Engineering for Gas Turbines and Power, 2002
- A Sequential Fluid-Mechanic Chemical-Kinetic Model of Propane HCCI CombustionSAE International Journal of Advances and Current Practices in Mobility, 2001
- A Multi-Zone Model for Prediction of HCCI Combustion and EmissionsSAE International Journal of Advances and Current Practices in Mobility, 2000