Continuous CO2 Capture in a 1‐MWth Carbonate Looping Pilot Plant
- 6 August 2013
- journal article
- research article
- Published by Wiley in Chemical Engineering & Technology
- Vol. 36 (9) , 1518-1524
Abstract
The carbonate looping process is an efficient technology for post‐combustion CO2 capture from fossil‐fired power plants. Testing campaigns with continuous CO2 capture were performed in a 1‐MWth carbonate looping pilot plant at the Technische Universität Darmstadt. During two distinguished experimental campaigns the heat for the regeneration of the calcium‐based sorbent in the calciner was provided by propane combustion and combustion of pulverized hard coal, respectively. For several hours of operation, the CO2 concentration in the flue gas was reduced to chemical equilibrium conditions. High overall CO2 capture efficiencies above 90 % were achieved.Keywords
This publication has 7 references indexed in Scilit:
- CO2 Separation by Carbonate Looping Including Additional Power Generation with a CO2‐H2O Steam TurbineChemical Engineering & Technology, 2012
- Integration and evaluation of a power plant with a CaO-based CO2 capture systemInternational Journal of Greenhouse Gas Control, 2010
- Feasibility study on the carbonate looping process for post-combustion CO2 capture from coal-fired power plantsEnergy Procedia, 2009
- Fluidized Bed Combustion Systems Integrating CO2Capture with CaOEnvironmental Science & Technology, 2005
- Capture of CO2 from combustion gases in a fluidized bed of CaOAIChE Journal, 2004
- The reversibility of the reaction CaCO3 ⇄ CaO+CO2Journal of Chemical Technology & Biotechnology, 1973
- 87. The calcium oxide–carbon dioxide system in the pressure range 1—300 atmospheresJournal of the Chemical Society (Resumed), 1962