Impact Force Identification of the Variable Pressure Flexible Impact End-Effector in Space Debris Active Detumbling
Open Access
- 26 April 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (9) , 3011
Abstract
The security of the space environment is under serious threat due to the increase in space debris in orbit. The active removal of space debris could ensure the sustainable use of the space environment; this removal relies on detumbling technology. According to the characteristics of the mechanical impact-type active detumbling method, this paper discusses a method to accurately identify the impact force using a pressure sensor. In this work, the impact force between a flexible impact end-effector and the space debris was analyzed theoretically and experimentally considering the pressure change during impact. Firstly, a nonlinear impact force model was established for the impact between a flexible end-effector and space debris. Secondly, impact experiments were performed and the friction model was modified. Finally, the effect of detumbling was verified through simulation experiments. The results showed that the identification error of normal impact force was less than 6.7% and the identification error of tangential friction force was less than 6.9%. Therefore, this identification method of impact force met the requirements of space debris detumbling, which has important guiding significance for the active removal technology of space debris.Keywords
Funding Information
- National Natural Science Foundation of China (51705128)
- Key Laboratory of Space Intelligent Control Technology Open Fund (ZDSYS-2017-08, BJ2019049, ZWK1803)
- Natural Science Foundation of Hebei Province (E2019202132, E2019202169)
- Natural Science Foundation of Tianjin Municipality (18JCTPJC54700, 19JCYBJC19100)
This publication has 9 references indexed in Scilit:
- Frontier technology and system development of space debris surveillance and active removalChinese Science Bulletin, 2018
- Distributed piezoelectric vibration control for a flexible-link manipulator based on an observer in the form of partial differential equationsJournal of Sound and Vibration, 2016
- Attitude Stabilization of an Uncooperative Spacecraft in an Orbital Environment using Visco-Elastic Tethers2016
- Review and comparison of active space debris capturing and removal methodsProgress in Aerospace Sciences, 2016
- Maneuver and vibration control of flexible manipulators using variable-speed control moment gyrosActa Astronautica, 2015
- An active debris removal parametric study for LEO environment remediationAdvances In Space Research, 2011
- Strategy for capturing of a tumbling space debrisActa Astronautica, 2011
- Rotational motion-damper for the capture of an uncontrolled floating satelliteControl Engineering Practice, 2001
- Coefficient of Restitution Interpreted as Damping in VibroimpactJournal of Applied Mechanics, 1975