Response Surface Model Optimization Algorithm for Structural Assessment Based on Vibration Frequency
Authors:
- Xiao-Guang WangXWXiao-Guang Wang
- Ming M. A.MAMing M. A.
- Bin ZhaoBZBin Zhao
- Wen-Hao ZhangWZWen-Hao Zhang
- Shuai SongSSShuai Song
Open Access
- 1 January 2025
- journal article
- Published by Wiley in Shock and Vibration
- Vol. 2025 (1)
Abstract
Finite element model modification based on response surface method is an effective engineering method that can significantly improve the accuracy of finite element model and structural evaluation. In order to solve the shortcomings of the response surface method based finite element model correction, which exists that the polynomial order selection rule is unknown and the correction result is easily affected by the quality of the optimization target, based on the relationship between the polynomial order and the response surface accuracy and computation amount, a robust estimation algorithm was introduced to optimize the response surface solution process, which improves the reliability of the response surface based model correction. Taking an actual project of a cable‐stayed bridge as an example, the response surface‐based finite element model modification method was adopted to compare the response surface accuracy and computation amount of three kinds of response surface models, namely, second‐mode polynomials, third‐mode polynomials and fourth‐mode polynomials. The optimization results of the robust estimation method were compared with the traditional solution method under the conditions of large fluctuation and small fluctuation of optimization target between finite element index. The results show that with the increase of the polynomial order of the response surface model, the unknown covariates to be solved in the response surface model increase sharply, which increases the computational cost, but the effect of improving the accuracy of the response surface model is limited. When the target frequency fluctuates greatly, compared with the least‐squares method, robust estimation will not transfer the error of the correction result of the order with the large fluctuation of the index difference to the other orders, which ensures the stability of the correction results.Keywords
Funding Information
- Shanxi Provincial Key Research and Development Project (2023-YBGY-140)
- Shanxi Provincial Key Research and Development Project (2020GY-096)
- Key Research and Development Program of Ningxia (2022BEG03173)
This publication has 33 references indexed in Scilit:
- Approach for the structural reliability analysis by the modified sensitivity model based on response surface function - Kriging modelHeliyon, 2022
- Effect of soil properties on the dynamic response of simply-supported bridges under railway traffic through coupled boundary element-finite element analysesEngineering Structures, 2018
- Sensitivity-based finite element model updating of a pontoon bridgeEngineering Structures, 2017
- Bridge stress calculation based on the dynamic response of coupled train–bridge systemEngineering Structures, 2015
- Finite element model calibration effects on the earthquake response of masonry arch bridgesFinite Elements in Analysis and Design, 2011
- Finite element model updating in structural dynamics by using the response surface methodEngineering Structures, 2010
- Dynamic response of bridges to moving trains: A study on effects of random track irregularities and bridge skewnessComputers & Structures, 2009
- Improved bridge evaluation through finite element model updating using static and dynamic measurementsEngineering Structures, 2009
- Effects of speed, load and damping on the dynamic response of railway bridges and vehiclesComputers & Structures, 2008
- Seismic response of bridge pier on rigid caisson foundation in soil stratumEarthquake Engineering and Engineering Vibration, 2008