Effect of Pressure on Dendrite Structure and Characteristics of Carbides during Solidification Process of H13 Die Steel Ingot
Authors:
- 15 June 2021
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 61 (6) , 1889-1898
Abstract
In this paper, the effect of solidification pressure on the dendrite structure and characteristics of carbides in H13 die steel ingot was investigated by experimental and calculational methods. Based on the effect of pressure on the cooling rate, a formula is proposed to calculate the secondary dendrite arm spacing: λ2 = 71.45 × R-0.37. It is applicable when the maximum value of pressure is around 2 MPa and the cooling rate is between 0.5 and 3 K/s. With increasing pressure from 0.1 to 2 MPa, the effects of pressure on the segregation ratio of V, Mo, Cr and C are little and can be neglected, which caused by the combined effect of equilibrium partition coefficient, diffusion coefficient and cooling rate. Therefore, the characteristics of carbides are determined by the decreasing the secondary dendrite arm spacing and increasing cooling rate with the increment of pressure. With increasing pressure from 0.1 to 2 MPa, the types of carbides are not change, which are MC and M2C in H13 die steel ingot. Meanwhile, the mean area of carbides decreases obviously with increasing pressure, and the decrement in mean area at the edge is larger than that at the center of ingot.Keywords
This publication has 43 references indexed in Scilit:
- Microstructure and Properties of Hot Working Die Steel H13MODJournal of Iron and Steel Research International, 2013
- Effect of solidification rate on the morphology and distribution of eutectic carbides in centrifugal casting high-speed steel rollsJournal of Materials Processing Technology, 2010
- Mathematical Model for Prediction of Composition of Inclusions Formed during Solidification of Liquid SteelISIJ International, 2009
- Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatmentsJournal of Materials Processing Technology, 2004
- The nucleation and growth of polycrystalline quartz: Pressure effect from 0.05 to 3 GPaEuropean Journal of Mineralogy, 2003
- Thermomechanical fatigue behavior of Cr–Ni–Mo cast hot work die steelScripta Materialia, 2001
- Gas Porosity Defects in Duplex Stainless Steel CastingsMaterials Science Forum, 1999
- Macro-Micro Modeling of the Dendritic Microstructure of Steel Billets Processed by Continuous Casting.ISIJ International, 1998
- Effect of Microstructure on the Toughness of Hot Work Tool Steels, AISI H13, H10, and H19Transactions of the Iron and Steel Institute of Japan, 1987
- Kinetics of nucleation for non-spherical nuclei and the effect of high pressuresCrystal Research and Technology, 1979