Flame retardancy and thermal properties of rigid polyurethane foam conjugated with a phosphorus–nitrogen halogen-free intumescent flame retardant
Authors:
- 19 February 2020
- journal article
- research article
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 38 (3) , 235-252
Abstract
In this work, a halogen-free intumescent combining phosphorus and nitrogen, flame-retardant 2-((2-hydroxyphenyl)(phenylamino)methyl5,5-dimethyl-1,3,2-dioxaphosphinane 2-oxide (HAPO) was successfully synthesized. It had been synthesized by reaction of 5,5-dimethyl-1,3, 2-dioxphosphinane 2-oxide with Schiff base. Its chemical structure was characterized in detail by Fourier transform infrared spectroscopy, 1H NMR, and 31P NMR spectrum. The flame-retardant polyurethanes were prepared with different loadings of HAPO. The thermal properties, flame retardancy and combustion behavior of the pure polyurethane foam thermosets were investigated by a series of measurements involving thermogravimetric analysis, limited oxygen index measurement, UL-94 vertical burning test, and cone calorimeter test. The results of the aforementioned tests indicated that HAPO can significantly improve the flame retardancy as well as smoke inhibition performance of polyurethane foam. Compared with the PU-Neat, the limited oxygen index of flame-retardant polyurethanes (15%) thermoset was increased from 19.5% to 23.8% and its UL-94 reached V-0 rating. In addition, the cone test results showed that the heat release rate, total heat release, rate of smoke release, and total smoke production of flame-retardant polyurethanes (10%) were decreased obvious sly. The apparent morphology of carbon residue was characterized by scanning electron microscopy, and results revealed that the modified polyurethane foam can form dense carbon layer after combustion. Thermogravimetric analysis results also indicated that the char amount of flame-retardant polyurethanes was obviously increased compared with PU-Neat. Based on the above analysis, we can draw the conclusions which in the condensed phase, phosphorus-based acids from the degradation of HAPO, this could promote the formation of continuous and dense phosphorus-rich carbon layer. In the gas phase, the flame-retardant mechanism was ascribed to the quenching effect of phosphorus-based radicals and diluting effect by non-flammable gases.Keywords
Funding Information
- Natural Science Foundation of Inner Mongolia Autonomous Region (2019MS02007)
This publication has 64 references indexed in Scilit:
- Effect of a triazine ring‐containing charring agent on fire retardancy and thermal degradation of intumescent flame retardant epoxy resinsPolymers for Advanced Technologies, 2011
- Preparation of flame-retarding poly(propylene carbonate)Green Chemistry, 2011
- Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development?Materials, 2010
- Thermal stability and flame retardancy of polyurethanesProgress in Polymer Science, 2009
- Flame retardant epoxy polymers based on all phosphorus-containing componentsEuropean Polymer Journal, 2002
- Effect of structure on thermal behaviour of phosphorus containing addition polyimides and epoxy resinsMaterials Research Innovations, 2001
- Modeling of Heat Transfer of a Polypropylene-Based Intumescent System during CombustionJournal of Fire Sciences, 1999
- Phosphorus-containing epoxy for flame retardance: IV. Kinetics and mechanism of thermal degradationPolymer Degradation and Stability, 1997
- Phosphorus-containing epoxy for flame retardant. III: Using phosphorylated diamines as curing agentsJournal of Applied Polymer Science, 1997
- Study of the mechanism of intumescence in fire retardant polymers: Part I—Thermal degradation of ammonium polyphosphate-pentaerythritol mixturesPolymer Degradation and Stability, 1984