Electromagnetic performance of three‐phase doubly fed doubly salient electromagnetic generator
Authors:
Open Access
- 1 March 2016
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 10 (3) , 161-171
Abstract
In this paper, a three‐phase dual armature‐winding doubly fed doubly salient electromagnetic generator (DAW‐DFDSEG) is proposed. The reason for using different numbers of turns in the two sets of armature windings is presented. On the basis of the finite‐element method (), two different DAW structures (DAW1 and DAW2) with different turn numbers of armature windings are analysed and compared. The DAW2 structure outputs more power than DAW1 under the same turn number of armature windings, due to the stronger flux‐weakening armature reaction under heavy magnetic saturation. However, the manufacturing technique of DAW2 is more complex than that of DAW1 in the limited stator slot. The DAW1 with two set armature windings of 11 and 12 is researched in detail in terms of flux linkage, induced voltages, winding voltages, winding currents, self‐inductances and mutual inductances by simulation and the equivalent rectifier circuit patterns of two time zones are also presented. Meanwhile, its commutation procedure is analysed in detail. To validate the analysis, a 12/8‐pole DAW‐DFDSEG prototype has been designed and the simulated waveforms agree well with the measured ones.Keywords
This publication has 21 references indexed in Scilit:
- Deformation and Noise Mitigation for the Linear Switched Reluctance Motor With Skewed Teeth StructureIEEE Transactions on Magnetics, 2014
- Excitation Winding Short-Circuits in Hybrid Excitation Permanent Magnet MotorIEEE Transactions on Energy Conversion, 2014
- Design procedure of segmented rotor switched reluctance motor for direct drive applicationsIET Electric Power Applications, 2014
- Comparison of Test Result and Design Stage Prediction of Switched Reluctance Motor Competitive With 60-kW Rare-Earth PM MotorIEEE Transactions on Industrial Electronics, 2014
- Two‐dimensional finite element magnetostatic model of a permanent magnet synchronous generator for predicting its steady‐state performance under different loading conditionsIET Electric Power Applications, 2013
- Overview of Stator-Permanent Magnet Brushless MachinesIEEE Transactions on Industrial Electronics, 2011
- Flux regulation ability of a hybrid excitation doubly salient machineIET Electric Power Applications, 2011
- Analysis and performance of a permanent-magnet synchronous generator supplying an isolated loadIET Electric Power Applications, 2010
- Design, Analysis, and Control of a Hybrid Field-Controlled Axial-Flux Permanent-Magnet MotorIEEE Transactions on Industrial Electronics, 2009
- Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric VehiclesIEEE Transactions on Industrial Electronics, 2008